- Home
- Equipment
Refine by
Resintech Environmental Equipment & Supplies
63 equipment items found
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech WBACR is an acrylic gel weak base anion resin. WBACR has exceptionally high capacity weak base resin with almost no strong base functionality. ResinTech WBACR is intended for use in single cycle exhaustions such as cartridges, waste treatment applications, systems where release of hydroxides is problematic, and systems that can accomodate a relatively long rinse requirement. WBACR is ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech WBG30 is a granular gel epoxy polyamine weak base anion resin. WBG30 has higher capacity than other anion exchange resins and has substantial strong base functionality. ResinTech WBG30 is intended for single use applications that require the highest possible operating capacity. WBG30 is available in the free base form or with the strong base sites regenerated into the hydroxide form ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech ASM-10-HP is a chloride form arsenic selective hybrid anion exchange resin. ASM-10-HP has hydrated iron oxide monoatomically dispersed throughout the polymer. It captures arsenate first by ion exchange and then by absorption into the iron oxide hybrid. ResinTech ASM-10-HP is intended for arsenic removal from potable water, and can also be used as an ion exchanger for removal of uranium ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech BSM-50 is a borate form hybrid anion resin selective for silica and antimony. BSM-50contains hydrated iron oxide crystals monatomically dispersed throughout the polymer. It absorbs antimony, silica, and other contaminants by a combination of ion exchange and adsorption. ResinTech BSM-50 is intended for removing trace levels of antimony and can also be used to remove silica from borated ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech ASM-125 is a chloride form gel hybrid anion resin selective for silica and antimony. ASM-125 contains hydrated iron oxide crystals monoatomically dispersed throughout the polymer. It absorbs antimony, silica, and other contaminants by a combination of ion exchange and adsorption. ResinTech ASM-125 is intended for use removing trace levels of antimony and can also be used to remove ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech IT-1 is an inert bead form resin designed with a bead size and specific gravity in between that of active cation and anion resins. ResinTech IT-1 is intended for mixed bed demineralizers where a barrier layer of inert resin is desired surrounding the interface collector after backwash. IT-1 is supplied in an inert ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech IT-1 is an inert low density support media for packed beds. IT-5 is significantly less dense than water and is rectangular in shape. IT-5 is intended to float above the active resin in packed bed ion exchangers. ResinTech IT-5 acts as an upper support bed and prevents resin fines from clogging distributer screens. IT-5 is supplied in an inert ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SIR-200 is a hydrogen form macroporous mercury selective weakly acidic cation resin. ResinTech SIR-200 has unique functionality that makes it selective for mercury and other heavy metals. SIR-200 is also very selective for noble metals when present as cations. SIR-200 is intended for mercury removal and for removal/recovery of various precious metals. ResinTech SIR-200 is supplied in ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SIR-300 is a sodium form macroporous chelating weak acid cation resin. SIR-300 has unique chelating functionality and is able to remove divalent transition metals preferentially to alkaline earth metals such as calcium. ResinTech SIR-300 is intended for removal of low to moderate concentrations of heavy metals from waste streams. SIR-300 is supplied in the sodium form, can be special ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SIR-700-HP is a granular gel weak base anion resin with unique epoxy polyamine functionality. It utilizes a secondary mechanism for chromate removal that causes chromium to precipitate inside the resin matrix when the feed pH is slightly acidic. ResinTech SIR-700-HP is intended for all chromate removal applications. SIR-700-HP is shipped in the acid chloride form and can be special ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SIR-900 is a granular aluminum oxide based adsorbent. SIR-900 is supplied as an active oxide media based on porous aluminum oxide. ResinTech SIR-900 is intended for removal of fluoride from water. It can also be used for the removal of arsenate, selenate, and lead from potable water. SIR-900 is supplied in the activated adsorbent ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SBACR is a chloride form type 1 acrylic gel strong base anion resin. SBACR has an aliphatic chemical structure that is elastic and open allows organic ions to move in and out of the resin easily. ResinTech SBACR is intended for use in the chloride form as an organic trap and for use in the hydroxide form for demineralizers that have a high level of organics in the feedwater. SBACR is ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SBG1P is a chloride form type 1 porous gel strong base anion resin. SBG1P has higher moisture content and lower ion exchange density than SBG1. This results in higher operating capacity, better chemical efficiency and improved resistance to fouling. ResinTech SBG1P is intended for use in the hydroxide form for all types of deionizing systems as well as in the chloride form for removal ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech CG10-UPS is a sodium form 10% crosslinked gel strong acid cation resin. CG10-UPS is a uniform particle size resin with high void space and low coefficient of drag. ResinTech CG10-UPS is intended for use where resin uniformity is an important attribute to help reduce pressurea loss or prevent strainer plugging. CG10-UPS is available in the sodium or hydrogen form (when ordered as ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SACMP-UPS is a sodium form macroporous highly crosslinked strong acid cation resin. SACMP-UPS is a uniform particle size resin with high void space and low coefficient of drag. ResinTech SACMP-UPS is intended for use where resin uniformity is an important attribute to help reduce pressure loss or prevent strainer plugging. SACMP-UPS is available in the sodium or hydrogen form (when ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SBG2-UPS is a narrowly graded chloride form type 2 gel strong base anion resin. SBG2-UPS is a uniform particle size resin which results in increased void space and lower coefficient of drag. ResinTech SBG2-UPS is intended for use where resin uniformity is an important attribute to help reduce pressure loss or prevent strainer plugging. SBG2-UPS is supplied in the chloride form or can be ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech SBMP1-UPS is a narrowly graded chloride form type 1 macroporous strong base anion resin. SBMP1-UPS is a uniform particle size resin which results in increased void space and lower coefficient of drag. ResinTech SBMP1-UPS is intended for use where resin uniformity is an important attribute to help reduce pressure loss or prevent strainer plugging. SBMP1-UPS is supplied in the chloride ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
ResinTech AGC-30 AD is a dry, acid washed, bituminous coal based, premium grade, granular activated carbon with a size range of 8 to 30 mesh. AGC-30 AD has large pores and high capacity for large organic molecules.ResinTech AGC-30 AD is intended for high flow rates and where suspended solids are present that might plug a finer mesh ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
This basic testing package covers all the major cations, anions and physical characteristics that are important in determining what water treatment option will work the best given the water quality. This includes twenty-nine (29) metals and minerals, and seven (7) other inorganic compounds with nine (9) physical characteristics important to diagnosing water treatment problems. ...
Manufactured by:ResinTech Inc based inLichfield, UNITED KINGDOM
This deluxe testing package covers all the major cations, anions and physical characteristics, volatile organic chemicals and radiologicals that are important in determining what water treatment option will work the best given the water quality. This includes twenty-nine (29) metals and minerals, and seven (7) other inorganic compounds with nine (9) physical characteristics, fifty-three (53) ...