- Home
- Equipment
Refine by
Spi Environmental Equipment & Supplies
36 equipment items found
Manufactured by:Stainless Processing, Inc. based inCoatesville, PENNSYLVANIA (USA)
Duplex grades are the newest of the stainless steels. This material is a combination of austenitic and ferritic material. This material has higher strength and superior resistance to stress corrosion cracking. An example of this material is type 2205. It is available on order from the ...
Manufactured by:Septic Products Inc. (SPI) based inAshland, OHIO (USA)
Available in 120/208/240VAC-1PH models. 4X rated durable, weather-resistant enclosure with mounting feet. Circuit breakers for pump(s) and alarm circuits, DP rated motor contactors. Easy-to-access terminal block. Definite purpose-rated contactors. Pump hand-off-auto ...
Manufactured by:Solidification Products International, Inc. (SPI) based inNorthford, CONNECTICUT (USA)
When a high water table, poor-draining soil or other factors make vertical drainage into the ground difficult or impossible, discharge of water from a containment area can still be accomplished horizontally through a Petro-Pipe. In these cases, a berm, curb or wall can be installed to hold back rainwater that might also contain oil. Installing several Petro-Pipes through concrete, asphalt or ...
Manufactured by:Stainless Processing, Inc. based inCoatesville, PENNSYLVANIA (USA)
High-pressure water and the addition of abrasives cut a wide variety of stainless steel thicknesses with precision. Water jet cutting is often used when the materials being cut are sensitive to the high temperatures generated by other methods like plasma cutting. During the fabrication process, Water Jet cutting is most often used when the application requires less heat be applied to the ...
Manufactured by:Stainless Processing, Inc. based inCoatesville, PENNSYLVANIA (USA)
Stainless Processing, Inc's plasma cutting machines feature bevel cutting capabilities that allow for very diverse and very precise angled cuts on any edge of steel plate. A computer controlled bevel head torch cuts beveled edges in any number of shapes and configurations. From simple rectangular tank or vessel shells, to irregular shapes, Stainless Processing, Inc. produces your parts to your ...
Manufactured by:Solidification Products International, Inc. (SPI) based inNorthford, CONNECTICUT (USA)
All of SPI’s Containment Liners are engineered as “Complete Oil-Spill Containment Systems,” proven to Prevent Oil Spills and Drain Unwanted Rainwater at all times using “Patented Technology”. SPI’s Containment Liner Systems are “Completely Sealed” leaving nothing to chance where your Valuable Property and Total Compliance are concerned. Contact SPI ...
Manufactured by:Solidification Products International, Inc. (SPI) based inNorthford, CONNECTICUT (USA)
Designed for the largest volume of water drainage in a good drainage field with a vertical type installation, Petro-Barriers™ are custom-designed and manufactured in our factory and delivered to your facility/facilities. Land slope, under-drain percolation rates, rainfall amount, containment area size and other factors are all considered in the system design. Large containment areas or ...
Manufactured by:Structure Probe, Inc. based inWest Chester, PENNSYLVANIA (USA)
The SPI Critical Point Dryer, based on the Polaron design, is the most widely used critical point dryer in the world. The SPI Critical Point Dryer is used in applications in electron microscopy, aerogel and MEMS ...
Manufactured by:Stainless Processing, Inc. based inCoatesville, PENNSYLVANIA (USA)
Precipitation hardening grades, as a class, offer the designer a unique combination of fabricability, strength, ease of heat treatment, and corrosion resistance not found in any other class of material. These grades include 17Cr-4Ni (17-4PH) and 15Cr-5Ni (15-5PH). The austenitic precipitation-hardenable alloys have, to a large extent, been replaced by the more sophisticated and higher strength ...
Manufactured by:Septic Products Inc. (SPI) based inAshland, OHIO (USA)
NEMA 4X watertight enclosure with captive bolted hinged door. Built-in receptacle for pump and pump switch (120 VAC or 240 VAC). Gas-tight cord seal and PVC mounting hardware included. Terminal strip and ground screw for power supply and alarm system. Two-year limited ...
Manufactured by:SPI Borescopes based inMiami, FLORIDA (USA)
The Recon 3915 and 3930 series borescopes by SPI Borescopes are offered with probe lengths of 1.5 meters and 3 meters, featuring side view and dual view options. Equipped with a 6-inch high-definition screen, these borescopes address visibility issues with clear, detailed imaging. They offer 4-way 360-degree joystick-controlled articulation and can bend up to 180 degrees, providing excellent ...
Manufactured by:Septic Products Inc. (SPI) based inAshland, OHIO (USA)
Pedestal Alarm. Large Light. Auxiliary Contacts. Audible Horn. 120 VAC Pump Receptacle. 9 V battery back-up. 20' Alarm Float. External Silence Switch (high ...
Manufactured by:Septic Products Inc. (SPI) based inAshland, OHIO (USA)
Mechanically-activated, High Amp, 90 degree wide-angle float to directly control a pump. Foam-Filled shell adds to durability. Not sensitive to rotation or turbulence. For use in water and sewage applications. Controls pumps up to 1-1/2 HP at 120 VAC and 3 HP at 240 ...
Manufactured by:Solidification Products International, Inc. (SPI) based inNorthford, CONNECTICUT (USA)
Petro-Plugs are disposable oil barriers that are more effective and less expensive than oil/water separators. Designed to fit standard piped floor drains in boiler rooms, garages, warehouses, oil storage areas and underground vaults, the Petro-Plug removes low levels of diesel, gasoline and oils while allowing water to flow through as usual. Depending on the drain diameter, Petro-Plugs installed ...
Manufactured by:Specialty Products Inc. (SPI) based inLakewood, WASHINGTON (USA)
PTC™ is a color stable, solvent-free, waterborne dispersion that can be used in a broad number of coating applications. Film produced from this versatile coating demonstrates outstanding abrasion resistance, flexibility and wear resistance properties. The product gives a long-lasting, high-gloss finish that provides weatherability, and is water and fire resistant to a variety of surfaces. ...
Manufactured by:Specialty Products Inc. (SPI) based inLakewood, WASHINGTON (USA)
For more than 30 years, DURATHANE II™ has provided weather-resistant coating for polyurethane foam insulation and roofs. This elastomeric moisture-cured urethane coating has excellent adhesion to polyurethane foam, asphalt shingles, wood, concrete and masonry. It’s also is wear resistant, waterproof and fire resistant on a variety of surfaces. Moisture does not affect the elastomer ...
Manufactured by:Stainless Processing, Inc. based inCoatesville, PENNSYLVANIA (USA)
Martensitic grades were developed in order to provide a group of stainless alloys that would be corrosion resistant and hardenable by heat treating. The martensitic grades are straight chromium steels containing no nickel. They are magnetic and can be hardened by heat treating. The martensitic grades are mainly used where hardness, strength, and wear resistance are ...
Manufactured by:Structure Probe, Inc. based inWest Chester, PENNSYLVANIA (USA)
Use these wide-opening tweezers to easily pick up the SEM mount from the GSR kit. Width at end: 25 mm. Style GSR. Tip Wide-opening. Material Antimagnetic stainless ...
Manufactured by:Stainless Processing, Inc. based inCoatesville, PENNSYLVANIA (USA)
Ferritic grades have been developed to provide a group of stainless steel to resist corrosion and oxidation, while being highly resistant to stress corrosion cracking. These steels are magnetic but cannot be hardened or strengthened by heat treatment. They can be cold worked and softened by annealing. As a group, they are more corrosive resistant than the martensitic grades, but generally ...
Manufactured by:Septic Products Inc. (SPI) based inAshland, OHIO (USA)
Available in 120/208/240VAC-1PH models. 4X rated durable, weather-resistant enclosure with mounting feet. Circuit breakers for pump, compressor, and alarm circuits. Easy-to-access terminal block, timer operation (24-hr). Full HWA alarm circuit (visual and audible ...