- Home
- Equipment
Refine by
Applications
- Dust and oil collection for the ceramics industry
- Dust & oil mist collection for the rubber and plastic industry
- Dust & oil mist collection for the rock products and metal mining industry
- Dust & oil mist collection for the foundry industry
- Dust & oil mist collection for the wood products industry
- Dust & oil mist collection for the paper products industry
Tornado Environmental Equipment & Supplies
29 equipment items found
Manufactured by:Advanced Misting Systems based inSan Clemente, CALIFORNIA (USA)
J&D Manufacturing’s complete line of corrosion resistant fans has smooth shaped housing with a gel coat on the inside for easy cleaning, minimal dirt and disease build-up and maximum air flow. Our LIFETIME WARRANTY on the Fiberglass housing is a confirmation of strength and durability even in the most hostile agricultural conditions. Our unique motor mount design allows for quick and ...
Manufactured by:TAD-LEN based inRawicz, POLAND
It can be used for working with plant protection products and liquid mineral fertilisers admitted for trade in Poland. For other purposes the pump can be used only after consultation with the manufacturer, under pain of losing the warranty. It is a diaphragm-piston pump, four-cylinder, on rolling bearings (shaft in the casing) and slide bearings (crank bearing). It is made of aluminium alloys, of ...
Manufactured by:Vortex International Limited based inNew Plymouth RD2, NEW ZEALAND
Bernoulli's principle states that with an increase in the speed of a fluid a decrease in pressure results. Therefore lower pressure (high suction) = higher water speed. With 100kpa of pressure drop the patented Vortex T100 TORNADO Venturi has the highest suction on the market and higher water speed than a venturi without the Patented Vortex. This video shows the incredible effect of the Vortex ...
Manufactured by:Tornado Global Hydrovac based inCalgary, ALBERTA (CANADA)
Our most maneuverable HVAC truck, the F3 ECO-LITE is the ideal choice for customers with job sites that commonly exist in urban centres. With a water hauling capacity of 1250 US gallons and a debris hauling capacity of 10 cubic yards the F3 can tackle any ...
Manufactured by:ProVent, LLC based inHarbor Springs, MICHIGAN (USA)
The TORNADO TXE Series Cyclone operating principle is simple and effective method for removing process dust from an air ...
Manufactured by:Silmisa Maquinaria ,S.L based inOnil, SPAIN
A trommel for recycling is a specialized machine that is used in the recycling industry to separate and classify materials of different sizes and types. It is an essential part of the recycling process, especially in urban solid waste recycling plants, construction and demolition waste, industrial waste and other recyclable ...
Manufactured by:Scrappers Recycling Technology based inTorun, POLAND
The Mini Recycling Line, with a performance capacity of 50kg/h, is a sophisticated set of machinery tailored for the scrap recycling process. Integrating shredding and separation techniques, it features the TORNADO series mills, engineered for rapid processing of feed materials with optimized chamber time and sieve placement. This ensures a consistent material fraction through balanced rotor RPM. ...
Manufactured by:F-DGSi based inEvry, FRANCE
The nitrogen generators serie TORNADO offer to you a unique, innovative solution to nitrogen gas supply. A reliable, secure source of nitrogen can be produced from your existing compressed air supply, eliminating the need for liquid nitrogen or high pressure gas ...
Manufactured by:W.E.Ware & Co. based inNewton, AUSTRALIA
The Tornado orbital tank washer is liquid driven and can be used for mobile or stationary applications. The round jet nozzles rotate in two planes and produce focused high impact jets generating a highly efficient 3D wash ...
Distributed by:a1-cbiss based inBirkenhead, UNITED KINGDOM
The Tornado Model 602 is a continuously self-cleaning filter that protects analysers from particulates in liquid samples. In normal operation, components of interest flow through the Tornado’s element to the analyser. Contaminants are shed by the element and removed through the Bypass port. The G.U.T.S. (Genie Ultimate Thermoplastic Seal) gasket is an excellent alternative to expensive ...
Manufactured by:The MART Corporation based inMaryland Heights, MONTANA (USA)
Features & General Construction: Closed Loop Zero Discharge: Standard. Wash Pump Suction Strainer: Standard. Adjustable Thermostat: Standard. Temperature Gauge: Standard. 24 Hour 7 Day Clock: Standard. Low Water System Shut-Off: Standard. Door Safety Interlock: Standard. Wash Cycle Timer: Standard. Sheet Steel Cabinet Thickness: 7 ga. 230 V or 460 V 60 Hz, 3-Ph Controls: Standard. Automatic ...
Manufactured by:Bolton Emerson Americas, LLC based inVonore, TENNESSEE (USA)
No other pulper can do what the TORNADO can do. The TORNADO is uniquely utilized in two major applications: “Impossible” broke recovery - For the size reduction of a wide variety of materials, the TORNADO pulper is the most efficient pulper for the recovery of waste from products considered impossible to defiber such as electrical insulation papers, gasket stock, map paper, shoeboard, ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's air-assisted flare stacks are designed to eliminate smoke emissions when combusting heavy hydrocarbons. Smoke emissions are the result of inefficient combustion of the waste gas producing unburnt hydrocarbon particles, often caused by an insufficient fuel/oxygen content ratio. Smoke emissions may violate local or national clean air regulations, or they may trigger landowner ...
Manufactured by:Fluence Corporation based inPLYMOUTH, NEW YORK (USA)
Effective in all seasons, the addition of an Aqua Tornado can dramatically improve the quality of water in a lake or pond and can maintain large ice-free areas during winter ...
Manufactured by:Orizzonti s.r.l. based inImola Bologna, ITALY
The TORNADO deleafer for vineyards has a reversible working head and vertical roller suction system. The machine has an hydraulic distributor for the following movements: vertical lift; side extension; 180° head rotation and on/off motors directly from the box. Standard parking tripod. It requires a pair of hydraulic connectors and a free tractor return coupling with 30 lt/min and 180 bar/ ...
Manufactured by:Giunti SpA based inUmbertide (Perugia), ITALY
HH models PE hose size is between 90mm and 125mm with lengths ranging from 220 to 480 ...
Manufactured by:TAD-LEN based inRawicz, POLAND
It can be used to work with plant protection products and liquid mineral fertilisers admitted for trading in Poland. Is is a diaphragm-piston, six-cylinder pump on, on rolling bearings (shaft in the body) and sliding (connecting rods on the shaft). It is made of aluminium alloys, plastics and good grades of steel, and therefore it is resistant to corrosive effects of liquid mineral fertilisers. ...
Manufactured by:Vortex International Limited based inNew Plymouth RD2, NEW ZEALAND
The most powerful 4-inch ROV and diver dredge in the world, the VORTEX 'Tornado' 4-inch dredge is capable of a near perfect vacuum of 97kpa (28in/hg) - which to our knowledge, is unheard of with dredge ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Incinerators / Thermal Oxidizers are the ultimate combustion system for disposing of hydrocarbons (including BTEX's) and sulfur ...
Distributed by:Columbus McKinnon Corporation based inCharlotte, NORTH CAROLINA (USA)
Redefining lever-operated hoists, the CM® Tornado 360°™ features the revolutionary Sidewinder™ lever handle that allows for efficient operation in both lifting and pulling applications. Ergonomically designed for increased safety, the patent-pending CM Tornado 360° lets the operator to work up to 12 times faster and with as much as 30% less pull force than with ...