Show results for
Refine by
Soil Groundwater Equipment & Supplies
10 equipment items found
Manufactured by:AMS Analitica based inPesaro, ITALY
The new impactor models have been manufactured in full respect of features published in reference norms regarding impactor for PM2.5 dust particle fractionation, with the option of simple adaptor kits for interchanging between one sampler and another for extremely easy, versatile use. All sampling phase settings are programmable from electronic programming microprocessor and sampling can be set ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The Automatic Isokinetic Sampler AirCube COM2 ISO is available with new features in its range and flow control, its new winning design and its ulterior practicality and versatility in its ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Equipped with a single-head diaphragm pump with pulsation dampener with a flow range from 1 to 28 liters per minute and with the ability to electronically compensation for pressure drops up to 700 mm / Hg over the full effective sampling range. All sampling parameters such as flow rate, sampling time and temperature standardization, can be set from the main menu. The new Air Cube Basic-Extra ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The GasCheck Basic sorbent tubes sampling devices, should be connected with a portable AirCube sampling pump, in both models COM2-TH and Gas-Pro. Each GasCheck basic, consist of 6 sorbent tube sampling support for standar chemical sorbent tubes or thermal desorption 6,35 mm OD sorbent ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The system has a 12 sorbent tubes supports, available for different tubes sizes and the flow range, allow the user to choice the applications with standard sorbent tubes (chemical desorption) and thermal desorption tubes in the 6,4x89 mm standard dimensions. A special option is dedicated to Formaldehyde DNPH sampling procedure, with the inlet and sampling line based with a inner copper tube, to ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The sampling sequential system is the reply to continuous requests for an easier to use tool without any locating and installation issue. The system concerns a derivate in anodized aluminum reducing dust passage friction to the minimum guarantying maximum sampling ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Easy to use, the Dustcheck DPM-1 PM sampler fit with all sampling needs. Based with a powerful aspirating diaphragm pump (the EPA version has built in a single head diaphragm pump) that allows the system to perform sampling in a constant flow option to compensate any pressure drop coming from overload samples. The new microprocessor capabilities allow the user to select and store in the memory up ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The new high volume Air Flow PM10-HVS sampler line equipment perfectly complies with UNI-EN 12341 norm requirements for the respective sampling of PM-10 particles. It is equipped with an electronic flow control with a Venturi tube system in compliant with ISO 5167 requirements with differential pressure devices and for the detection of pressure itself on 4 points per sector, offering the user ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The era of samplings with long interminable settings can be considered over with the new AirCube COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The system is based on simultaneous sampling in the same flow line of PM10 particulate (or in alternative PM2.5) with as well support for the sampling of PAH by way of vial adsorption in purified polyurethane foam (PUF). As an alternative to this latter a vial containing multiple layers of PUF and XAD-2 may be ...