Only show results available in Virginia? Ok

Site Remediation Applications

  • Thermal Remediation Inside & Near Buildings & Infrastructure

    In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other infrastructure.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Lime and Limestone solutions for remediation of soils, industrial sludge and animal waste

    Lime treatment has several beneficial effects on soils and industrial sludge wastes that in turn provide benefits to other commercial sectors such as agriculture, landfill operations and land development.

    By Carmeuse Lime based in Pittsburgh, PENNSYLVANIA (USA).

  • US Peroxide Total Chemical Management

    US Peroxide (USP) provides turn-key chemical management and field service programs to engineering companies and remediation technology applicators using In-Situ Chemical Oxidation (ISCO) or other technologies requiring chemical storage and handling. USP programs have proven to be cost effective and highly efficient using custom-designed chemical handling and management programs deployed by highly skilled field service teams. Advantages USP can supply a wide range of chemicals such as hydrogen peroxide, ferrous sulfate, sodium persulfate, acids and others commonly used for ISCO or other remediation technologies. USP works with remediation companies to develop a cost effective, logistically optimized and reliable chemical management program based on project specific chemicals, quantities, usage rates and other project constraints. We can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Soil and groundwater protection in the petroleum industry

    Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

    By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

  • Air pollution control for the leachate remediation industry

    Waste water treatment from landfills and other industrial operations – commonly use catalytic oxidizers for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Air pollution control for the soil remediation industry

    Treatment of exhaust gases from systems that process polluted or contaminated soil – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Groundwater Monitoring for Remediation

    Many fresh water sources have been degraded to toxic levels by the inclusion of industrial, agricultural, and human waste products that have been discharged into the closest body of water, accidentally or deliberately for many years.

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA).

  • Solutions for the in-situ soil remediation

    For over twenty years, BioSolve Pinkwater has been used for Surfactant Enhanced Remediation (SER) to mobilize and solubilize residual NAPL[i], facilitating its recovery and disposal. Depending on soil and plume characteristics, Pinkwater solution can reach contaminated zones through deep injection wells or be gravity fed from surface level injection galleries. After desorbing residual NAPL from soil surfaces on contact, Pinkwater then solubilizes the hydrocarbons in an aqueous emulsion, enabling extraction at down gradient recovery wells or trenches.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Chlorine dioxide for municipal wastewater treatment industry

    Wastewater Deodorization: The formation of hydrogen sulfide often poses a problem for municipal wastewater treatment.  Chlorine dioxide, a powerful oxidant, can be effectively used to control noxious, irritating, or pungent odors from many operations.  Moreover, its unique selective properties permit more efficient application at a lower dosage and cost than chorine, hypochlorite, permanganate peroxide or ozone.

    By DuPont Chlorine Dioxide based in North Kingstown,, RHODE ISLAND (USA).

  • High-calcium lime slurry for mining industry

    Multiple applications, from acid neutralization of mine waste and process control for mineral separation, to off gas desulphurization, lime is often considered the “life blood” of the mining industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Laboratory analysis for environmental consulting

    Ormantine USA works closely with consultants, engineers, and other environmental professionals on a daily basis to help find the best solutions to meet individual needs. Ormantine air and soil samplers can be used in: Remediation Performance; Soil Gas Monitoring; Site Assessments; Brownfield Redevelopment; Landfill / Waste Management; Decontamination; Hazardous Material Investigations; Emission Monitoring & Testing; Exposure Assessment; Industrial Hygiene and Risk Management

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Petrochemical Waste Degradation

    Waste Water Treatment Plants, Landfill Leachates, Refinery Lagoons, Degreasing and Land remediation.

    By Cleveland Biotech Ltd. based in Stockton on Tees, UNITED KINGDOM.

  • Erosion & sediment control solutions for soil remediation

    REMEDIAL ACTION PRACTICES include the requirements to develop erosion and sedimentation control plans, specifying plan content and soil conservation measures to keep sediment–laden mud from washing into storm sewers and watersheds where debris can clog creek channels and choke off aquatic life. Sediment control BMPs combine structural and non–structural measures used to avoid or minimize pollutants accumulated by environmental hazards across impervious surfaces.

    By Erosion Control Forum based in Bend, OREGON (USA).

  • Premium

    Foam covering for site remediation

    By Rusmar Inc. based in West Chester, PENNSYLVANIA (USA).

  • Premium

    Site investigation for horizontal drilling

    Site investigation for horizontal drilling.

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Site investigation for tunneling operation

    Site investigation for tunneling operation

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Abatement and Remediation

    Containment and safety issues are a critical consideration when working on any mold, asbestos, or lead remediation/abatement projects. Improperly contained, the dust and bio-contaminants released can, be very harmful for both on-site workers and occupants in neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. In most cases, however, there are four common considerations that will be relevant: -Meeting Containment and Air Change Requirements -Monitoring of Containment Pressure -Sterilization of Filtered Air -Removal of Odors, Mold Spores, VOC’s and other Airborne Bio-Contaminates

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you