Refine by
Water Pumping Equipment & Supplies
34,892 equipment items found
Showcase
Manufactured by:Aymas Makina based inKemalpasa, TURKEY
Capacity up to 40 tons per hour. Light and heavy duty scrap can be processed ( HMS 1 & 2 , cars, pipes etc. ). No operator needed. Sensitive cut length adjustment. Electric and Diesel ...
Showcase
Manufactured by:Vobis LLC based inEaston, PENNSYLVANIA (USA)
Our crystallizers are capable of yielding solids from a vast spectrum of product and waste feed streams enabling our clients to cost-effectively produce product crystals or reduce waste stream volumes creating landfill-ready solid ...
Showcase
by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:Lenntech Water Treatment based inDelfgauw, NETHERLANDS
Low energy demand and high recovery, Fully automatic system, microprocessor controlled, Mounted on plastic skid, The system includes: 5 microns filter, High pressure pump, Permeate conductivity display, RO or NF membranes 2,5' membranes, PVC Pressure vessels, Flowmeters and Pressure gauges, RO controller, Option: antiscalant dosing ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
Elimination of the Liquid. The ES series allows you to obtain a concentrate in the form of dry mud/crystals in the boiling chamber, and a condensate that can be recycled into the industrial process. Volumes processed 100 – 1,000 ...
Showcase
Manufactured by:Dragflow S.r.l. based inRoverbella (MN), ITALY
The EL5 is an electric pump with high abrasion resistance and can handle material concentrations up to 70%. It is the ideal solution for industrial, mining, and dredging applications in other fields, guaranteeing maximum efficiency and ...
Showcase
Manufactured by:Tana Oy based inJyvaskyla, FINLAND
TANA Hammerhead D industrial waste shredder is suitable for shredding of most reusable, recyclable and recoverable materials. The purpose may be volume reduction, refuse derived fuel production or recyclable material production. The key to productivity is the machine’s versatility. It is able to handle materials from MSW to waste wood, from plastics to tyres and it can be used either as a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Additional equipment for Soil ...
Premium
Manufactured by:F&J Specialty Products, Inc based inOcala, FLORIDA (USA)
The Model MRB200H3E Tritium collection system consists of a three 20 ml vial bubbler train for collection of tritium in water vapor. A diaphragm pump with an automatic flow control mechanism utilizing the F&J digital flowmeter system is provided. Typical flow range is 75 to 200 sccm (other flow range options are available). Real-time data download is available through the RS232 port. An ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-VAC vacuum flushing system is designed for flushing rainwater, surface water, combined sewage/rainwater, raw sewage storage tanks and equalization basins. ACU-VAC can be used in circular storm tanks (up to 65 m in diameter), rectangular storm tanks (up to 150 m in length) and sewer systems (up to 250 m in length). The ACU-VAC is designed to have a tank bottom slope of between 0.5 and 2%. ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT testing. The stand-alone CPT penetrometer pusher set composes of a 200 kN penetrometer pusher featuring 2 hydraulic cylinders with manually operated valves, a diesel-hydraulic power-pack with a Hatz diesel engine and ...
Premium
Manufactured by:Dragflow S.r.l. based inRoverbella (MN), ITALY
The DRP18 is a remote-controlled dredge equipped with a dredge pump with a discharge diameter of up to 100 mm (4 inches). This dredge is designed to tackle the most challenging conditions in ports, quarries, mines, and industrial docks, offering operator safety and unrivaled ...
Premium
Manufactured by:Lone Star Drills. a Little Beaver Company based inLivingston, TEXAS (USA)
The LS200H+ features the same operator-inspired design as the LS200H, but with a more robust hydraulic system and more powerful engine. Its high-capacity, load-bearing swivel coupled with a high-pressure hydraulic motor provides enhanced reliability and serviceability. With the addition of tricone roller bits and drill collars, the LS200H+ efficiently drills to 200 feet, even in rock formations. ...
Premium
Manufactured by:F&J Specialty Products, Inc based inOcala, FLORIDA (USA)
The Model GAS-28BE Global Air Sampling System is a microprocessor controlled low volume air sampler consisting of an ¼ H.P. oil-less carbon vane vacuum pump with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system ...
Premium
Manufactured by:Dragflow S.r.l. based inRoverbella (MN), ITALY
The HY85/160 is an hydraulic pump with high abrasion resistance and can handle material concentrations up to 70%. It is the ideal solution for industrial, mining, and dredging applications in other fields, guaranteeing maximum efficiency and ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 60-19/660-19 Pump Control Valve with a High-Capacity Pilot System is a pilot-operated valve designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. Specifically designed for larger sized pump ...
Premium
Manufactured by:F&J Specialty Products, Inc based inOcala, FLORIDA (USA)
Model LV-1D is a low volume air sampler consisting of a 1/4 H.P. oil-less, carbon vane vacuum pump with a flow meter, a vacuum gauge and a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val 61-02 and 661-02 Deep Well Pump Control Valves are designed to protect pipelines from surges caused by the starting and stopping of deep well pumps. They are hydraulically operated diaphragm valves, controlled by a solenoid pilot valve. Separately adjustable flow control valves in the pilot system regulate the opening and closing rates. A limit switch on the valve stem serves as an ...