Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.
Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample.
A modern production method of nitric acid may lead to a generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in the manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in a formation of nitrogen dioxide NO2 and nitrous oxide N2O.
Cargo containers and wooden packing materials are fumigated to control the spread of pests and micro-organisms. However, fumigant gases are toxic and present a danger to human health even at low concentrations. Additionally, products shipped in containers may release VOCs from the solvents, coatings and glues used in manufacturing processes, and the concentrations of these vapors may be significant in the confined space of the container. Gas measurements are required to protect the health of any workers involved...
According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, etc.
For over 40 years Sierra has advanced our flow technology to offer customers around the globe the most cutting-edge thermal technology on the market. From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols for easy network integration. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal. Buy a large selection our air flow meter...
Low flow measurement and control is a difficult application. Ultra low flow mass flow controllers can accurately control flows from 0.1 to 0.4 sccm which is ideal for measuring and controlling doping gases for pilot plants and other research houses.
Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.
The measurement of gas flow in large ducts or pipes offers its own set of challenges. Large ducts and pipes often have swirls or turbulence in them which makes measurement of true gas flow difficult. Sierra has developed a number of solutions to this vexing problem, including stand-alone flow conditioning elements and multiple arrays of thermal sensors. By including hot taps and purging systems, such arrays can be very flexible.
From bulk gas delivery to cleaning to purging operations, Sierra`s mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra`s mass flow meters and controllers a tool-makers choice.
From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal.
SO2 is one of several important pollutants in the atmosphere, SO2 from the atmosphere can stimulate people`s respiratory tract, abate respiratory function, and lead to respiratory resistance decreased, induce various inflammation of respiratory tract, harm to human health. SO2 also is harm to many plants. SO2 and its generated sulfuric acid mist can corrode metal surfaces and cause damage to paper products, textiles, leather products. It may also form acid rain, which is serious harm to the ecological system and...
Welcome to our Chimney Inspection Cameras section. Chimney Inspection Cameras are becoming increasingly popular, especially when physical inspection of chimney surfaces is not feasible. This is particularly necessary for small diameter chimney liners, old stone flues in unknown condition, in order to get safety certificates, etc.
In the business of winter recreation, the weather can become both a friend and a foe. When the conditions just aren’t right for natural snow, snowmaking becomes a great alternative. For snowmaking to be successful, certain conditions must be met. Humidity levels and ambient temperatures affect the wet bulb temperature, super-cooling comes into effect, and evaporation levels must be measured. How are you supposed to measure all these conditions, you ask? Great question. After all, you’re a snow maker,...
The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to production units downstream. This is determined at two sampling points in the process: EDC purification unit – top Light Column. EDC purification unit – top Heavies Column. For all other analytical solutions in the chlorination process, please browse the On-line Analyzers Suite under Products & Solutions.
The purpose of determining ferric chloride in liquid EDC (ethylene dichloride) is to avoid contamination of EDC and decrease risk of corrosion to production units. For all other analytical solutions in the chlorination process, please browse the On-line Analyzers Suite under Products & Solutions. Background: Ferric Chloride (FeCl3) is used as catalyst in the EDC reactor. The FeCl3 colors the EDC with a yellow / brown color which is measured with an opacimeter.