Only show results in Connecticut? Ok

Water & Wastewater Applications

  • Premium

    Air pollution control solution for incineration sector

    Waste incineration, such as sewage sludge, municipal solid waste and hazardous waste incineration are areas under particular scrutiny by regulators because of their multiple toxic pollutants. The Clean Air Group, LLC has been selected by several hazardous waste facilities to design and build integrated multiple pollutant air pollution control systems to replace existing scrubber systems to meet the new Maximum Achievable Control Technology (MACT) standards. In several instances, only a scrubber was required, in ...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Chemical filtration in lacquers for the recycling industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and ...

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Pelleting plants for Recycling industry

    Sustainability and recycling are becoming increasingly important issues. "What happens to the waste produced?" AMANDUS KAHL plants provide the answers to these ...

    By AMANDUS KAHL GmbH & Co. KG based in Reinbek, GERMANY.

  • Premium

    REMOTOX for laboratory waste applications

    REMOTOX® for the removal of a wide range of heavy metals and other potentially harmful compounds commonly found in laboratory waste streams. Reducing hazardous waste on site to the minimum quantity can save transportation and disposal cost. Please contact us today for additonal info, pricing or a free sample for your ...

    By Graus Chemicals, LLC based in Carefree, ARIZONA (USA).

  • Premium

    Shredder applications for Tannery waste

    Shredded to reduce size and optimize ...

    By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.

  • Premium

    Grinder applications for Tannary waste

    Pre-shredded tannery ...

    By ITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY.

  • Premium

    Special plants for recycling of electronic waste (WEEE)

    Proper disposal of electronic waste (WEEE) and of waste in the R4 category, i.e. waste such as electrical and electronic equipment, allows the recovery of a large number of precious metals and ...

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Ice blasting technology for cleaning contractors

    Currently have a cleaning company, or looking to start your own? Position your business with the power of using wet or dry ice to meet any tough challenge that comes your way. As many companies offer ‘just’ dry ice blasting. Make your company’s services stand apart by offering wet ice blasting as well. With the cost and performance advantages regular ice can offer; your business will have an edge in the ...

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Premium

    Industrial screening solutions for recycling industry

    Since our founding, VibraScreener has been committed to creating innovative products that help our clients meet the challenges of a changing world. With all the global environment trends and limitation of resources we face today, recycling has become necessary to the preservation of our planet and to be able to get the most out of our materials. Therefore our commitment to the industry is serious, and we take pride in helping our customers contribute to a more environmentally friendly ...

    By VibraScreener Inc. based in Charlotte, NORTH CAROLINA (USA).

  • Gas phase reduction technology solutions for vehicle tires conversion sector

    The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that converts all organic waste within the tire. The GPR technology converts all aspects of the tires to either a methane product gas or the steel and carbon black components, which are 100% recovered for recycling. The technology operates within a closed system with no stack or chimney. ...

    By Natural Energy Systems Inc. (NES) based in Burlington, ONTARIO (CANADA).

  • Waste Treatments Plants for Stabilising

    This method is used to process and stabilise the organic fraction of municipal waste, thus reducing greenhouse gas emissions and leachate drain. Not only does this relieve pressure on the environment, the stabilised waste is also easier to landfill. ...

    By Biodegma GmbH based in Ludwigsburg, GERMANY.

  • Scrap recycling plants for fridge recycling

    URT is the world's leading manufacturer of refrigerator disposal plants. For over 25 years URT engineers are working in this field and creating plant concepts for the different customer demands. More than 50 plants worldwide are equipped with the URT technology. URT refrigerator recycling plants have achieved excellent results especially in the field of CFC's (VFC) recovery. The changeover to CFC-free refrigerants and blowing agents (VHC) was a new and further challenge for URT engineers, because substitutes are ...

    By URT Umwelt- und Recyclingtechnik GmbH based in Karlstadt, GERMANY.

  • ANIS Baling for wet insulation material manufacturers

    The above-mentioned solutions are already available. New demands on us only mean new challenges. The bale can be bound according to the weight of the material transported into the baler. The material can be partially torn apart for easier filling if there are very large pieces at the filling entrance. We offer a baler that is adjusted to the baling of wet material and to having water leakage. Slide sleeves and other exposed parts are made of solid, wear-resistant materials because of the abrasiveness of the glass ...

    By Anis Trend d.o.o. based in Loški potok, SLOVENIA.

  • Recycling and separation of shredder light fraction

    Ad Rem's main focus is currently on the processing, reuse and recycling of Shredder Light Fraction. Currently shredder light fraction is already being processed at Group Galloo with the Ad Rem equipment. With the enormous experience in house on this subject, Ad Rem is currently designing a complete new recycling facility for Group Galloo. This new facility will be specialized in treating Shredder Light Fraction. This installation is full of new exiting technologies and hopes to set the standards for the next ...

    By Ad Rem based in Menen, BELGIUM.

  • Communal trucks, truck maintenance units, multifuncional machines, minivans, pickup trucks & utility vehicles for high pressure washing & intensifiers applications

    Since electricity in many cases is rather unavailable or does not supply sufficient power to allow efficient use of the various pressure water techniques, combustion engine driven pressure washers require quite some space, are heavy, difficult to handle in one man operation and additional machinery need additional space, you can use the HWB model. It is sufficient to install a small hydraulic system or a power pack in pick-up-trucks or trucks and the cars become a proper complete versatile ...

    By Neron Pumps based in Ranica, ITALY.

  • Dominator despackaging machines for Food waste industry

    Separate waste from its packaging by processing through the Dominator. Expired food, faulty packaging or rejected food can all be processed and then used for Anaerobic digestion or added to animal feed. Remove plastics and unwanted foreign objects from rejected food waste. Recovered food can either be dropped directed into a container below the Dominator, mechanically conveyed away or pumped into a tank. Processed plastics can then be ...

    By Rowan Food and Biomass Engineering Ltd based in Gloucestershire, UNITED KINGDOM.

  • Carbonisation for Upcycling

    Biomass contains much more than just the energy of the future. Selected biogenic residues (SRC wood, silage waste, extract residues, paper fibre sludge…) can be refined into new, valuable products such as biochar, charcoal feed or activated carbon by carbonisation (charring). But even if the material can no longer be refined, you benefit from the carbonisation in the PYREG ...

    By Pyreg GmbH based in Dörth, GERMANY.

  • Vacuum systems in city centres

    Waste handling operatives face many challenges in city centres. Traffic jams, a lack of space and lots of people. At the same time, ensuring a clean, tidy city environment is becoming an ever more important competitive advantage for city brands. The Envac vacuum system for waste handling results in considerably cleaner ...

    By Envac AB based in Stockholm, SWEDEN.

  • Vacuum systems in historical city centres

    Waste handling operatives face many challenges in historical city centres. Modernisation has to take place with caution so as not to damage buildings or surroundings of cultural historical value. The Envac vacuum system for waste handling is particularly suited to such environments, as demonstrated by our many installations all over ...

    By Envac AB based in Stockholm, SWEDEN.

  • Protection and Filtration for Industry and waste areas

    Geotextiles enhance both drainage and lining systems in environmental applications. In the large industry of waste containment, geotextiles are used to protect and cushion landfill liners and landfill capping systems, and they are used as critical components of geocomposites such as geocomposite drains and geosynthetic clay liners. Heavyweight, needle-punched nonwovens are use as cushion/protection for landfill and pond liners to keep adjacent stones in overlying or underlying drainage layers from puncturing the ...

    By Mattex Geosynthetics based in Dubai, UNITED ARAB EMIRATES.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you