Spill Control Equipment in Oklahoma

1664 Results found
  • Category: Health & Safety ×

  • Subcategory: Spill Control ×

  • Location: USA ×

  • Location: Oklahoma ×

Flaring Solutions for the Midstream Oil and Gas industry - Marine Loading Terminal

by ABUTEC LLC

Barge and marine vessel loading facilities are key players in the midstream oil and gas pipelines. These facilities must have a system specifically designed to control and combust the vapors inherently produced in the oil cargo transfer process. Additionally, potential hazards related to the loading of barges and vessels are great, and include ...

Husky - Double Folding Frame Water Tanks

by Husky Portable Containment

Husky offers Double Folding Frame Tanks for the end user that has limited storage space. These unique frame tanks have a second folding point on the long side of the frame allowing you to fold the frame tank one more time cutting the overall length in half. Just pull the special heavy duty pins from the laser cut hinges and fold your tank again. ...

Husky - Self Supporting Frameless Portable Water Tanks

by Husky Portable Containment

Husky® Self Supporting Water Tanks are the perfect solution when storage and manpower are a concern. One man set-up frees up personnel, and because these tanks are frameless, there is no assembly required and they are easy to transport and store. Husky® offers low and high side models. Most common sizes of our low side, self supporting ...

Husky - Freedom Series III - Self-Rising Drive-Through Berms

by Husky Portable Containment

Our drive-through Freedom Series III Self-Rising Berms are a unique one piece construction with self rising foam end and side walls. No inflation, no assembly! Side walls rise with the level of liquid entering the berm. Set up time is as quick as you can unfold it. This berm can be driven over from any angle without risking damage to the side or ...

Husky - Freedom Series IV - Aluminum Angle Drive-Through Berms

by Husky Portable Containment

Our drive-through Freedom Series IV Aluminum Angle Berms are designed with aluminum angle side walls and self rising foam end walls. Set up time is quick. Side walls have pockets every 24' or less to accept angle brackets. End walls can be driven over repeatedly with no damage. No leaving your vehicle to drive in or out. This drive through berm ...

Husky - Freedom Series II - Air Wall Drive-Through Berms

by Husky Portable Containment

Our Freedom Series II air wall drive-through berms are a one piece construction with air chamber side walls and self rising foam end walls. No assembly! Set up time is quick. Side wall air chambers are equipped with a pressure relief valve to prevent over inflation. End walls can be driven over repeatedly with no damage. These durable berms are a ...

Husky - Ground Covers

by Husky Portable Containment

Husky Ground Covers are designed to spread on the ground before you set up one of our tanks or berms. They protect the bottom of the tank or berm from all types of terrain. Our 10 oz. material is unmatched and is NFPA 701 certified fire resistant. Also the base fabric or “scrim” has a “Rip Stop” quality that eliminates ...

Husky - Standard Folding Frame Tanks

by Husky Portable Containment

Husky®'s port-a-tank liners are designed so there are no bulky corners or sagging liner. Our manufacturing process Our Easy Lift Handle mounted to the floor of our tanks US Patent No. 8,746,478and other patents pending helps not only drain the water but fold the liner/tank back up. We also install solid brass grommets in a tight pattern, ...

Husky - Bladder Berms and Liners

by Husky Portable Containment

Husky manufacturers secondary containment Berms and Berm Liners to match all our Bladder Tank sizes. If you have purchased a fuel or chemical Bladder Tank from us, you will most likely be required to have some type of secondary containment in case of a spill. Husky offers stand up Bladder Berms for when excavati

Husky - Eagle Series II - Continuous Air Chamber Berms

by Husky Portable Containment

Husky Air Wall Berms have a continuous air chamber that allows the air to disperse throughout the chamber when driving in and out of the berm. This design, along with the pressure relief valve, eliminates any blowouts.

Need help finding the right suppliers?

Let the XPRTs do the work for you