Only show results in Connecticut? Ok

Air & Climate Applications

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water and Wastewater Applications for Scraper Strainers Line

    Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    VOC abatement equipments for water & waste water

    Condensation occurs when warm, moist air meets a cold surface. An example of this is when taking a cold drink from a fridge into ambient conditions, and finding that condensation forms around the bottle. In a water treatment plant, the same occurs, with the water in the pipes being cooler than the surrounding air, and thus causing condensation to form. This condensation causes corrosion of pipes and electronic equipment as well as mold growth and faults caused by condensation on UV scanners.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    Storm water flushing for sewage wastewater treatment

    With the increased use of storm water retention tanks, the need arises to routinely clean the tanks. Regular cleaning maintains combined sewer overflow (CSO) capacity and prevents septicity and odor problems associated with stagnant effluent. PWTech® Tipping Buckets provide a simple yet robust solution for flushing retention tanks.

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA).

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    ADVANCEES - Formation Water Custom skid-mounted water purification equipments

    Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at sales@advancees.com

    By Advanced Equipment and Services based in Coral Springs, FLORIDA (USA).

  • Premium

    Liquid/solid separation equipment for remediation pollution treatment

    Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an “impermeable”...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Zero valent iron nanoparticles for algae bloom removal

    Blue-green algae or cyanobacteria are gram-negative bacteria that obtain their energy through photosynthesis. They have a huge resistance to adverse conditions due to their simple construction. Typically, they occur in lakes, ponds and slow-moving streams but they can survive even in hostile environment due to their simple construction. Massive development of cyanobacteria is caused by the accumulation of nutrients in stagnant water (eutrophication). Algae Blooms can cause human allergic reactions manifesting by...

    By Nano Iron s.r.o. based in Židlochovice, CZECH REPUBLIC.

  • Premium

    Odor control for sewage pumping stations

    By Simple Solutions Distributing LLC based in West Milford, NEW JERSEY (USA).

  • Premium

    Gas detectors for the water industry

    The water and wastewater industry can contain VOC contamination that should be measured at low concentrations. Waste can be dumped into water networks and a PID is able to detect spikes and even identify the source when coupled with a site-wide monitoring programme. Our humidity handling patented fence electrode technology is unrivalled when measuring in humid environments.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Water monitoring instruments for water & wastewater

    Our world-class end-to-end hardware and software products and systems save water and wastewater companies time and money by simplifying automation tasks and exploiting data in real-time. We are the leading global provider of truly end-to-end systems for the water industry including our own range of remote telemetry units (RTUs) for data acquisition, Loggers for Local & Remote Leak detection, scalable SCADA platform SCOPE and suite of Data Analytics solutions which are breaking new ground for water companies...

    By Ovarro (formerly Servelec Technologies & Primayer) based in Eckington, UNITED KINGDOM.

  • Premium

    Air pollution, emission and process monitoring systems for water & liquids

    Mercury is one of the most toxic elements that may be found in natural water bodies and can negatively affect living organisms, human health as well as drinking water quality. In addition, water is the main transportation and transformation pathway of mercury into the environment and living organisms. Mercury analysis in water is of great importance, in order to monitor water quality and associated environmental stresses. Mercury is also known to be a persistent, bio-accumulative toxin, indicating that its...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Biologigal processes for water & wastewater treatment industry

    Cost Effective Biofilm Processes With Low Energy Consumption. Whether it’s a new build, a refurbishment or a replacement sewerage plant project, low energy consumption and cost effectiveness are key factors when selecting biological wastewater treatment equipment.

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY.

  • Premium

    Iron and carbon dioxide removal by physical/chemical processes

    Carbon dioxide, iron and manganese salts are unwanted substances in drinking water. Often stripping processes are used to remove those. 2H MASSdek structured packings offer important advantages for stripping columns compared to random packings.

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY.

  • Premium

    Flood resilience solutions for the critical infrastructure sector

    Aquobex provides a bespoke service along with highly engineered products to ensure critical infrastructure sites and individual assets are protected and continue to offer service during floods or immediately after flooding subsides. Passive flood barriers, manual flood barriers, flood doors and flood gates can be designed into a scheme to protect specific locations. Alternatively mobile flood barriers can be provided with state-of-the-art geo-located flood sensors and emergency response systems. Aquobex can take...

    By Aquobex Ltd. based in Didcot, UNITED KINGDOM.

  • Premium

    Inspection of flow measuring equipment for hydraulic inspection

    Definition of Task: Metrologic inspection of flow measuring equipment according to German self-control ordination (EKVO). Inspection of flow measurement at relevant discharge point according to German regulations.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Mercury monitoring for ocean cruises

    Researchers at Battelle Pacific Northwest Laboratory used a Tekran 2600 on a 2009 ship cruise. Due to the low levels of mercury in water, Tekran provided them with a custom 2600 Event Table to pre-concentrate mercury from multiple samples to push the detection limit lower. When planning an ocean bound cruise, instrument dependability is a paramount concern. At sea, there is no possibility to return instrumentation to the manufacturer for quick repair. The Tekran 2600 has a well deserved reputation for dependability...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you