Only show results available in Virginia? Ok

Emissions Management Applications

  • Soil and groundwater protection in the petroleum industry

    Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

    By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

  • Mobile Sewage Treatment for the Oil and Gas Industry

    Due to the continued growth in the oil & gas industry, we are seeing an increased demand for mobile sewage treatment solutions for oil exploration and drilling rigs in remote locations.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • GIS software for petroleum industry

    For years, petroleum companies have used Esri`s GIS to decide where to drill a well, route a pipeline, build a refinery, and reclaim a site. Today`s GIS provides oil and gas industry solutions throughout the petroleum life cycle. All major oil companies in the world use Esri`s GIS technology to manage their location-based information, from leases, wells, and pipelines to environmental sites, facilities, and retail outlets.

    By Esri based in Redlands, CALIFORNIA (USA).

  • PLAZKAT systems for treatment of food industry emissions

    Manufacturing and processing food products produces emissions that must be treated. Firstly, emissions produced by heat-treating raw materials should be treated, in particular carboxylic acids, formaldehyde and acetone.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Innovative Pump Technology for Oil and Gas Industry

    Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

  • Air Emissions Management

    In most companies today, managers are overwhelmed with poorly organized, de-centralized data and are still making decisions by reacting to historical results driven by non-standardized processes and guessing about the future. Highly customized spreadsheets, manual extracts from hard to use ERP systems, “cut & paste” reporting…sound familiar?

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • PLAZKAT systems for treatment of emissions from ferrous and non-ferrous metal working industries

    Metal casting and heat treatment processes are associated with harmful gaseous emissions into the atmosphere which include substances such as carbon monoxide, nitrous oxides, oil vapors and sulfur dioxide.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Environmental Solutions for Airlines

    Governments the world over are now working on regulations that will require Airlines to monitor and manage their GHG emissions. The UK is leading this effort with requirements for 2010 - 2012, and other countries are soon to follow. Implementation of GHGWARE and the VisionMonitor Real-Time Environmental Performance Suite allows proactive GHG emissions and compliance data management in real-time as well as predictive modeling tools for planning of future regulatory compliance.

    By VisionMonitor Software, LLC based in Houston, TEXAS (USA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform continuous water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Combustion measurement for engines

    Combustion processes occur in many modern technologies such as power production, heating, automotive and aircraft engines and even explosion research.

    The application areas range from fuel injection and mixing and flow velocity information to measurements of combustion species and soot concentration.

    Because of the impact on the global climate and the limited resources of fossil fuels, the importance of these applications is increasing, especially with respect to performance, fuel economy and CO2 emissions.

    By Dantec Dynamics based in Skovlunde, DENMARK.

  • Environmental monitoring solution for power plant

    The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Integrated real-time gas analysis solution for emissions industry

    Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of toxic combustion products, including CO, CO2, NOx, SOx, CH4, CxHy, H2S, etc. The EP-IRGAS-SPA is also applicable for fast time responses.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Greenhouse gas monitoring for regulations and compliance consultancy

    Kurz thermal mass flow meters exceed the certification levels required by the Mandatory GHG Reporting regulation and are approved for these applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Measurement solution for accurate continuous formaldehyde measurement formaldehyde in emissions and ambient air applications

    Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human health.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Carbon footprinting calculations for environmental management

    With its expertise in calculating and managing emissions data, CERC offers a range of services to assess greenhouse gas emissions, from determining the carbon footprint of a single industrial process, to compiling a greenhouse gas inventory for a whole geographical area.

    CERC uses methods and emission factors laid out by the Intergovernmental Panel on Climate Change (IPCC). Emissions from transport, industrial, heating and agricultural activities are calculated and stored using the EMIT software package.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Analysis of Methylimidazoles in Caramel Colored Carbonated Beverages

    Caramel colorings are used as additives in a broad range of food and beverage products to impart a desired color, but have no nutritional or preservative function. Recently, the potential hazard to humans of ammonia- and ammonia-sulfite-process caramel colorings was raised, because they contain the by-product 4-methylimidazole, which is a potential carcinogen.1 The methylimidazole compounds are difficult to analyze due to their polar nature and low molecular weight. Traditional reversed phase techniques are unsuccessful in retaining these small polar compounds. Therefore, most HPLC methods utilize ion-exchange resins for analysis. Another common method involves GC analysis after the analytes first undergo a derivatization step. The purpose of the work shown in this article was to develop a simple and fast analytical method to determine the levels of 2-methylimidazole and 4-methylimidazole in caramel colored carbonated beverages.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you