Only show results in Texas? Ok

Health & Safety Applications

  • Premium

    Formaldehyde and Acetaldehyde Determination in Air Using Fully Automated On-Line Desorption and Analysis of DNPH Cartridges

    Airborne aldehydes and ketones are collected by passing air through a cartridge containing 2,4-dinitrophenylhydrazine (DNPH). Carbonyl compounds react with the DNPH to form hydrazones, which are immobilized on the cartridge. These compounds can be easily eluted from the cartridge with acetonitrile and analyzed by HPLC with UV detection. Traditionally, this analysis including the workup contains a series of manual steps, which can become time-consuming and could incur experimental error. Automating the extraction...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Eliminating the Environmental foot print for Offshore and On shore oil rigs

    OSE II eliminating the environmental foot print while reducing costs associated with drilling mud, drilling mud clean up, rig washing, rig operations and emergency oil spill response from oil rigs.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Odor control for municipal and government

    Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks....

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    NORM Waste Plants for Oil and Gas Industry

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Environmental solutions for the battery manufacturer industry

    Solutions for lithium-ion battery electrode manufacturing. Coating Lines and Solvent Recovery Systems: Dürr Megtec provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and slitting. Working with companies in the United...

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Chromatography laboratory instrumentation for chemical industry

    Effective, safe and sustainable processes play a key role in the chemical industry. To meet these needs, BUCHI offers a variety of reliable and modern solutions for R&D, scale-up, production and quality control.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Chromatography laboratory instrumentation for environmental analysis sector

    A clean and safe environment is a pre-requisite for health and quality of life. BUCHI contributes to this by providing market-leading solutions for sample preparation and analysis to a wide range of industrial companies, environmental testing labs, consultants, and government authorities.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Air pollution control for the petroleum processing and petrochemical industries

    The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you