Only show results in Michigan? Ok

Health & Safety Applications

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for chemical and pharmaceutical industry

    Since its foundation more than 25 years ago, HITEMA has developed a high level of experience in chemical and pharmaceutical processes that require thermal controls that can include a simple cooling or heating and, sometimes, precise cycles of temperature and timing, also granting a very high control precision for the necessary temperatures, high level of unit reliability, high efficiency; Upon request, the units can be supplied with stainless steel hydraulic covers and circuits.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Temperature measurement and control devices for iron & steel industry

    TTEC Products accurately measure process temperatures in all sorts of steel making applications. These include coke ovens, blast furnace, steel making, continuous casters, hot rolling mill, annealing lines, cold mill & coating lines. TTEC manufactures special NIST traceable TECPAK Thermocouples in 6-24 Ft lengths with MVD hardened tips for use in abrasive high temperature applications. TTEC Flanged Multipoint assemblies with Multiprobe Gland fittings provide accurate temperature profiles & easily replaceabl...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Environmental solutions for the metals and mining industry

    Dürr Megtec provides custom-designed gas cleaning solutions for the metallurgical industry. Gas cleaning for acid plants, furnaces and converters: Wet electrostatic precipitators for collecting fine particulate and sulfuric acid mists from SO2-rich gas streams. Wet and dry electrostatic precipitators for reduction of particulate from furnace and converter gas streams. Acid gas control with wet absorbers.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the refining and petrochemical industry

    Refining and Petrochemical Safety, Reliability and Environmental Sustainability.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Process cooling and industrial comfort applications solutions for air conditioning industry

    The wide range of products is able to satisfy all the comfort needs for light and commercial applications, Airports and Stations, Data Center, Hotels, Hospitals, Shopping Centers and many other applications. HITEMA provides innovative solutions with high energy saving performances, new natural refrigerants, high technology unit design and components as Danfoss TurboCor oil free compressors.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Environmental solutions for the iron and steel industry

    Evaporative Gas Cooling and Conditioning: The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, it helps electrostatic precipitators because the water spray completely evaporates while cooling...

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Analysis of Methylimidazoles in Caramel Colored Carbonated Beverages

    Caramel colorings are used as additives in a broad range of food and beverage products to impart a desired color, but have no nutritional or preservative function. Recently, the potential hazard to humans of ammonia- and ammonia-sulfite-process caramel colorings was raised, because they contain the by-product 4-methylimidazole, which is a potential carcinogen.1 The methylimidazole compounds are difficult to analyze due to their polar nature and low molecular weight. Traditional reversed phase techniques are...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Reduced Fat Interference with Analysis of Pesticides in Avocados

    QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) is a very popular method for the extraction and cleanup of fruit and vegetable samples for pesticide residue analysis.2-4 The extraction step uses acetonitrile and a salting out effect (with MgSO4). Cleanup is then accomplished using dispersive SPE (dSPE) followed by a centrifuge step prior to analysis. This application shows the clean-up and analysis using Supel™ QuE Z-Sep+ QuEChERS and an SLB®-5ms GC column.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Soil Remediation Plants for Soil and Groundwater Industry

    Contaminated soil and building-rubble can be efficiently treated with VacuDry technology, including a diverse range of toxic and hazardous substances. VacuDry units also have low emissions and low power consumption, making on-site treatment with our mobile units both economically and environmentally sound.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Noise modeling for noise consulting

    Noise planning that supports many governments and engineering associations worldwide.

    By SoundPLAN GmbH based in Shelton, WASHINGTON (USA).

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Chromatography laboratory instrumentation for food & beverage industry

    Effective measures against food fraud, efficient and healthy food processing and the development of functional food and neutraceuticals are just few of many challenges in modern Food and Beverage production and analysis. BUCHI offers classical reference methods and near infrared spectroscopy for food analysis, but also visualization of production processes using spray drying and encapsulation.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you