- Home
- Equipment
Refine by
Environmental Equipment & Supplies
304,193 equipment items found
Showcase
Manufactured by:We Care 4 Air Ltd. based inLeaden Roding, UNITED KINGDOM
The aeris AE2030 Carbon monoxide (CO) analyser employs a non-dispersive infrared (NDIR) photometer to measure low concentrations of CO with exceptional accuracy. The aeris AE2030 Carbon monoxide (CO) analyser employs a non-dispersive infrared (NDIR) photometer to measure low concentrations of CO with exceptional accuracy. Implementing a high intensity broadband infrared source passing alternately ...
Showcase
Manufactured by:Kurita Water Industries Ltd based inTokyo, JAPAN
Kurita Dropwise Condensation Technology is a patent pending technology to increase operating efficiency and conserve energy in industrial production facilities. This technology can be applied without apploying any additional system equipment. The KURITA DW product is dosed continuously into the steam line in front of the target device creating a water repellent film on the surfaces. Increasing ...
Showcase
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Showcase
Manufactured by:Unicon Engineers based inCoimbatore, INDIA
Designed to remove dry particulate matter, such as dust and ash, from industrial exhaust streams. They work by passing dirty gas between electrically charged plates and collecting the particles on those ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...
Showcase
Manufactured by:atech innovations gmbh based inGladbeck, GERMANY
Channels: 7. Length: 1000 / 1200 mm. Filter surface per element: 0.13 / 0.16 ...
Showcase
Manufactured by:Evvos S.A. based inHowald, LUXEMBOURG
23 weather variables: Relative Humidity, Ambient Temperature, Barometric Pressure, Precipitation, Solar Radiation, Wind Speed, Wind Direction, Heat Index, Dew Point, Frost Point, Wind Chill, Wind Chill Index, Water Vapour Pressure, Saturated Vapour Pressure, Speed of Sound in Air, Mixing Ration, Specific Humidity, Absolute Humidity of Air, Boiling Point of Water, Enthalpy, Atmospheric Moisture by ...
Showcase
Manufactured by:VIEW Micro Metrology based inRochester, NEW YORK (USA)
Available digital megapixel cameras offer significant advantages for precision metrology. The larger pixel array provides a larger field of view, while greater pixel density provides higher resolution. A larger field of view can improve throughput by capturing more part information with less stage motion. High pixel density improves accuracy and repeatability at a given ...
Showcase
Manufactured by:Datum Electronics based inEast Cowes, UNITED KINGDOM
The M425 is a precision dynamic torque sensor designed for inline torque, speed, and power measurement in rotating systems. Built with a non-contact signal transmission system and available in a range of torque capacities, it’s ideal for monitoring torque in motor, gearbox, pump, and drivetrain testing.With accuracy up to ±0.1% and digital or analogue outputs, the M425 delivers reliable, ...
Showcase
Manufactured by:Intecna srl based inMediglia (Ml), ITALY
Innovative methods are continuously required in water purification of a wide range of wastewater pollutants especially in case of difficult approach, then several technologies have been developed for example, Electrochemical Wastewater Treatments. Electrocoagulation system optimised by INTECNA, provides a relatively compact and robust wastewater treatment plant alternative in which special alloy ...
Showcase
Manufactured by:Dimaco sas based inGela (CL), ITALY
For the recovery of the floating product on the groundwater are used systems able to follow the movements of the flap itself and recover only the lightweight product. The system is equipped with a float floating with calibrated specific weight. In function of the supernatant layer and of the characteristics of this, may be used skimmer by gravity or selective skimmer (with hydrophobic filter in ...
Showcase
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The TROGLOPROBE PRO pipe inspection camera features an industrial-grade design suitable for tough environments. These units are the best solution to inspect wet areas since the complete system is waterproof and can work in torrential rain. With a range of interchangeable camera heads (1", 2" and 2.4" Pan & Tilt) the TROGLOPROBE PRO pipe camera is an ideal choice for municipalities, ...
Showcase
Manufactured by:Gasmet Technologies - a Nederman company based inVantaa, FINLAND
Cold Vapor Atomic Fluorescence (CVAF) is a powerful technique based on detecting fluorescence light emitted by the sample. Below the principle of the technique is explained in a ...
Showcase
Manufactured by:RunDry Evaporators based inMahwah, NEW JERSEY (USA)
RunDry’s RD-G10, 10gph RunDry Evaporators are a very efficient alternative for disposing of the wastewater from your industrial facility.This unit can be operate for about $0.08USD/gallon or $0.02USD/liter, this is a significant saving if you are paying for a waste hauler to take your wastewater ...
Showcase
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Traction Nozzle is an excellent multi-purpose nozzle. When an extremely tight water pattern is needed for intense directed cleaning and propulsion; few nozzles perform as well as KEG’s Traction Nozzle. With 8° and 12° angled jets, the Traction Nozzle will provide tremen- dous thrust and highly efficient cleaning using KEG’s Fluid ...
Showcase
Manufactured by:VEGA Grieshaber KG based inSchiltach, GERMANY
All-round radar measuring device - VEGAPULS 6X combines the best of the previous VEGAPULS 60 series. VEGAPULS 6X is a universal sensor for continuous level measurement of liquids and bulk solids under all process conditions. Due to its application-oriented configuration and setup, VEGAPULS 6X offers a reliable and economical solution for all level applications. Due to its variable antenna ...
Showcase
Manufactured by:Microrite Cleanroom Solutions based inSan Jose, CALIFORNIA (USA)
Microrite’s Tracer Particle Generator system provides a cloud of Tracer Particles that are sub-micron (less than 1 micrometer) in size and are Neutrally Buoyant. These long lasting, Neutrally Buoyant Tracer Particles are ideal for getting a visual representation of air flow patterns in cleanrooms, barrier systems and the interfaces between areas of different classifications (e.g., Grade ...
Showcase
Manufactured by:Vobis LLC based inEaston, PENNSYLVANIA (USA)
Our crystallizers are capable of yielding solids from a vast spectrum of product and waste feed streams enabling our clients to cost-effectively produce product crystals or reduce waste stream volumes creating landfill-ready solid ...
Showcase
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Full-range detection for emissions monitoring and utilities. Regulatory compliance and environmental protection demand accurate, continuous monitoring. MethaSense Trace meets those demands while reducing operational risk and maintenance ...
Showcase
Manufactured by:Untha Shredding Technology Gmbh based inKuchl, AUSTRIA
With a number of RS models in the fleet, talk to us about the shredder configuration that's right for YOUR requirements. We can also offer trials and reference site visits for the complete 'try before you buy' experience. Pre-shred and re-shred your materials in a single pass, for meticulous particle homogeneity, from 15-100mm. Tailor your loading aperture, shredder speed, torque, cutting ...