- Home
- Equipment
Refine by
Brooks Environmental Equipment & Supplies
27 equipment items found
Manufactured by:Illumicare Group Limited based inNewmarket, ONTARIO (CANADA)
Designed for installation in ponds and water gardens, Brook has a water-tight housing gasket and wire seal. The fully-rotatable shroud is perfect for underwater lighting, highlighting marine life, and creating moving shadows in and out of the ...
Manufactured by:Brooks Rand Instruments based inSeattle, WASHINGTON (USA)
The Brooks Rand methyl mercury systems are specifically designed for methyl mercury analysis by EPA Method ...
Manufactured by:Brooks Rand Instruments based inSeattle, WASHINGTON (USA)
The Brooks Rand air monitoring systems are ideal for collection and analysis of mercury in air. The air monitoring systems combine remote and portable sample collection with easy-to-use automated analysis for a high-throughput, cost-effective system. These systems allow for the simultaneous collection of multiple samples and rapid analysis of loaded gold amalgamation traps for an analytical ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
Multiple gases in one device equals maximum process flexibility and productivity. The GF40 Series elastomer sealed mass flow controllers and meters with Brooks Instrument’s exclusive MultiFlo™ technology provide the perfect choice for systems, processes and facilities that use a variety of gases, change gas types frequently or need to re-range while preserving gas measurement and ...
Distributed by:CCT Europe b.v. based inHelmond, NETHERLANDS
The S1510 keeps your process gasflow under control by instanteneous adaptation to pressure fluctuations in the exhaust; but also senses the process chamber pressure changes and sets its valve through a stepping motor within seconds at a pre-set value for fast flow ...
Manufactured by:Brooks Rand Instruments based inSeattle, WASHINGTON (USA)
In use at Brooks Rand Labs since 2006 and introduced commercially in 2007, MERX is the world’s first commercial automated analytical system based on US EPA Method 1630 for methylmercury analysis. Around the world, numerous national environmental agencies and leading universities have quickly embraced MERX as an easy-to-use, robust, and reliable system that delivers high quality ...
Manufactured by:Brooks Rand Instruments based inSeattle, WASHINGTON (USA)
The direct purge module controls gas flow to the autosampler and detector, and contains a vacuum pump, which is used to clear residual mercury vapor from the system between samples. The Nafion gas dryer is attached to this module. To minimize the bench footprint of the system, this module was designed to fit underneath the ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
For a wide range of chemical, petrochemical, biotechnology, research and analytical applications, Sho-Rate Series glass tube variable area flow meters provide industry-leading repeatability and reliability in two versatile lines. Sho-Rate 1350/1355 flow meters deliver up to 3% accuracy and 0.25% repeatability depending on the model. Sho-Rate™ 1250/1255 flow meters offer a durable, ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
The GT1600 Series glass tube VA flow meters are a NEW family of meters with a rugged design for long-lasting performance with low and high-flow gas and liquid applications where viewing the process is important. These versatile and economical meters are for general use in applications with moderate metering accuracy requirements — typical accuracy ranges are 1% to 10% full scale, ...
Manufactured by:Brooks Rand Instruments based inSeattle, WASHINGTON (USA)
Increasingly stringent mercury regulations have made old analytical methods based on atomic absorption, such as EPA 245.1 and 245.2, obsolete. To comply with current wastewater discharge permit requirements, many environmental testing laboratories are upgrading their capabilities to satisfy the lower required detection limits by implementing EPA 245.7. This method uses an atomic fluorescence ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
Imagine choosing just one mass flow controller platform to handle fourteen different pressure or flow rates going into a single process. All while delivering the exact same, ultra-precise and repeatable output on the other side. That’s the advanced simplicity you get with the SLA5800 Series digital mass flow controllers and ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
Offering state of the art performance in high temperature gas measurement and control, the 5850EMH Series high temperature metal sealed mass flow controller from Brooks Instrument combines the outstanding leak integrity of metal seals with a variety of options allowing maximum application flexibility. The heart of the 5850EMH Series is the highly stable sensor which provides an electrical output ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
Engineered to work where you need it: Choose the MT3809 variable area flow meter for all the high-pressure, high-temperature VA flow measurement and control requirements on your next project. Proven to deliver reliable, repeatable gas and liquid flow measurement and control in thousands of installed locations, the MT3809 is practical and economical, making it the “go-to” choice for ...
Manufactured by:Brooks Rand Instruments based inSeattle, WASHINGTON (USA)
The Brooks Rand Model III was designed with input from leading mercury researchers from around the world to meet the most demanding analytical requirements and is cited in US EPA Methods 1631, 245.7, and 1630. With the ability to adjust the sensitivity across a broad dynamic range and with one-button auto baseline zeroing, the Model III is an incredibly stable detector that can run continuously ...
Manufactured by:Brooks Brothers Trailers based inTroy, MISSOURI (USA)
PTB-30-46 – 20KA Extendable Pole Trailer. Retracted Length: 30’. Extended Length: 46′. Overall Width: 95”. Bolster Height: ...
Manufactured by:Brooks Automation based inChelmsford, MASSACHUSETTS (USA)
The PuroMaxx 800 fully automatic 300mm FOUP cleaner combines the best particle and AMC cleaning performance and provides humidity control at the highest throughput. Vacuum decontamination chambers are integrated to the footprint and loaded by the robot. Provides maximum performance by individually cleaning each EUV or RSP 200 ...
Manufactured by:Brooks Automation based inChelmsford, MASSACHUSETTS (USA)
The PuroMaxx 600 fully automatic central force cleaner is the perfect solution for the automatic cleaning of RSP150 or RSP200. In manual mode, all types of reticle or wafer carriers can be cleaned. The PuroMaxx 600 is the perfect solution for the automatic cleaning of RSP150 or ...
Manufactured by:Brooks Instrument based inHatfield, PENNSYLVANIA (USA)
Need reliable, durable flow measurement in high-pressure, high-temperature or hazardous process settings? The MT3750 metal tube variable area low flow meter from Brooks Instrument is your hard-working answer. Constructed from high-strength steel, the MT3750 Series VA low flow meter features a compact design and multiple threaded and flange connection options to make it easier to install and ...
Distributed by:CCT Europe b.v. based inHelmond, NETHERLANDS
The S1000/S9000 series Sentry Air Flow Controller warrant your resist spinner chamber pressure stable no matter what fluctuations you see in exhaust pipe pressure, thus securing a constant flow over your wafers to ...
Manufactured by:Brooks Brothers Trailers based inTroy, MISSOURI (USA)
The PRD (Pole, Reel, Dump) is a versatile piece of equipment that provides for hauling poles, spools of cable, and can be used as a dump trailer with a 50 degree dumping angle. This is truly a Swiss Army knife of trailers for Utility and Communication companies. Available in painted or galvanized ...