- Home
- Equipment
Refine by
Masdaf Environmental Equipment & Supplies
33 equipment items found
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
They are maintenance-free and do not require additional preparation due to their immersion in water. They do not cause noise and vibration because they work under water; Thus, it provides a comfortable operation. Since the pump and motor itself are in non-interfering conditions, they are subject to fewer human-induced ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Hexa series consist of vertical, staged pumps. All parts which come into contact with water are made of stainless steel. Suction and discharge flanges are along the same axis. Simple body and perfect balance provides for low noise and vibration. Mechanical seal is completely leakage proof. Body, impeller and shaft are stainless steel. Energy savings with frequency control devices. High ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
The flap connected to the suction flange has been specially designed so that is possible to clean or to remove and install the flap without touching the suction system. The roller bearing (bearing bushing) is supported by the pump body. There can be no problem in speed up. UKM series pumps are very easy to use because they are of self-priming type. Once the suction pipe is placed into the liquid ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Single stage, end suction, volute casing ISO EN 2858 DIN 24256 standard pumps. Centerline mounted, single stage volute casing pumps with mechanical seals and heating jacket (Centerline mounted model). Single suction, radial and mixed flow closed type impeller is equipped with back wear rings to balance axial loads. Impeller is also balanced dynamically according to ISO 1940-1 G6.3. Pump ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Single stage in-line type centrifugal pumps are produced with standard motors and mechanical seal. Pump flanges are designed in PN 16 pressure category compatible with DIN 2533. The suction and discharge flanges are identical and are on the same axis. Both flanges are equipped with pressure gage tapings. Single entry, closed impeller is equipped with rear rings to balance thrust and is ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
MiniUKM Series self priming wastewater pumps come with a compact design Specially designed open impeller structure provides its self priming capacity without compromising its hydraulic performance. Maintenance and cleaning of the pump can easily be done thanks to its simple assembly and disassembly. Usage of mechanical seal in these pumps, assures perfect sealing and a clean environment. ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
YNM series UL Listed/FM Approved pumps are single-stage, non-self-suction, end-suction centrifugal pumps. With 3 pumps as YNM 525, YNM 825 and YNM 1531, meets the flow range between 50 gpm and 1250 gpm. Pump flanges are designed according to ANSI/ASME B16.1 Class 250 norm. Pump performance tests meet the requirements of UL and FM standards. The single suction, shut-off ımpeller has ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Single stage, horizontal, separable body, radial impeller, double suction pumps. The back-to-back design of the double entry radial impellers eliminates all thrust. The suction and discharge flanges are along the same axis. Easy assembly feature. Double suction pumps have the advantage of low NPSH features. The pump and electric motors are connected to the chassis by means of flexible. ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Single stage, vertical shaft processing pumps with open or vortex type impellers. The open impellers are connected to the shaft by a wedge. The impellers are balanced according to ISO G 6.3. The back vanes of the impeller reduce the axial thrust and prevent the intake of solid particles. The cranks are designed so as to maximize hydraulic performance. The gear connection with the ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Mechanical seal completely prevents leakage. Ready for use with ali elements intact. Assembly is easy and economical. Pump stage nımbers varies between 4 and 10. The is the choice of completely stainless steel materials. Provides for extra comfort due to the low pressure between entry and discharge. Protection system against dry operation is ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: in HDSH series booster pumps, the centrifugal pump is placed on a horizontal footed tank is fitted with a membrane. The membrane is Butyl-Membrane which is compatible with standars of health. Located inside the tent, the membrane accords with German standards of health and is the type that gives no odor to water and prevents bacterial growth. The pump is sold asa complete package, ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
MiniDAF booster sets, domestic water or facilities prepared for pressurized water needs, silent running, fully automatic, comfortable, package booster. TankTanks are used in European safety standards (CE). MembrThe membrane inside the tank conforms to German hygiene standards, It does not smell in water and does not produce bacteria. IhazThe device is equipped with a cable with a plug at the with ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Synchronous gear with individually lubrication transfer torque form power screw to idler screw, for assuring without constant and without kinetic deliver between transfer elements. So that transfer element has high reliability when it transfers various mediums, at the same time the pump doesn’t damage when it works without oil in a short time. Specially designed hydraulic structure provides ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Pump is fully protected with a protection relay against possible electric motor overheat, overload and phase failure problems. H70RN-F class rubber coated cables, high resistance to corrosiveness of sewage water. If the cable gland seal fails, the cable gland sealed with resin prevents any possible leakage into the motor housing. Single and double row bearings ensure reliable operation by ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Wear-free, precision plain bearings ensure quiet operation and extend the service life of the pump. The winding resistance to high temperatures extends the service life of the pump and enables the pumping of high temperature fluids. Improved water intake ensures immediate lubrication of the bearings in the rotor chamber and small pumps do not require ventilation during commissioning. An automatic ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
CSV series double-suction vertical in-line centrifugal pumps are equipped with standard motors and mechanical seals. The impellers of CSV type pumps are (full) radial, double-sloped (Francis type) or mixed flow types. Bearing is provided with two grease lubricated, 6300 C3-type deep groove ball bearings according to DIN 625. TEFC (Totally Enclosed Fan Cooled) 3 phase, squirrel caged, in ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Flanges are acc. to DIN 2535. Flanges acc. to BS or ANSI are upon request. Normally, discharge part is at motor side on top, suction part is at dead end side on the right and rotation of direction is clockwise when viewed from driver. Suction and discharge nozzles may be a choice of three 90° positions. By special request, it is possible to put the suction nozzle at the motor side. In this ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: The KME Pump is a horizontal axis, radially split, ring section design multistage centrifugal pump of non-self priming type. Impellers are between bearings, single entry, closed type and dynamically balanced. Impeller diameter will be corrected for optimal adherence to the required duty point. For balancing the axial thrust, all impellers have back wear rings. For high pressure, balance ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
ENDURO 150F Lite- These pumps having open impeller being made of AISI 304 INOX stainless steel material can be used in discharging of sewage liquids containing max 20 mm particle and industrial and domestic wastewater and rain water. Also they can be used in little pools and waterfalls. Their maximum head is 12 m and they can discharge max 20 mm ...
Manufactured by:MAS DAF MAKINA SAN. A.S. based inAydinli, TURKEY
Design: Multistage, vertical shaft pumps used in DS - DB - DM - DMA - DMB - DM65 type boosters. DS - DB - DM - DMA - DMB - DM65 type boosters can be produced with one, two, three or four pumps depending on the depth for which they will be used. Level floaters of the booster set prevent the pump from functioning without water. The shafts in booster pumps are hexagonal and are made of AISI 430F ...