- Home
- Equipment
Refine by
Applications
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for aerospace & defense industry
- Monitors, gas analyzers solutions for photonics & optics
- Monitors, gas analyzers solutions for food and beverage safety sector
- Meet USP 797 environmental monitoring requirements
- Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
Pms Environmental Equipment & Supplies
61 equipment items found
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
ECHO EMERGENCYHV is the new TCR Tecora® high volume sampler for particulate and micropollutants sampling and monitoring in extreme conditions. TCR Tecora® research division highlighted the need to design a sampling system that can offer a viable solution in emergency or remote situations such as fires, high mountain, isolated areas, contaminated environments to allow PTS/PM10/PM2,5/PM1 ...
Manufactured by:BWF Envirotec, U.S. based inHebron, KENTUCKY (USA)
Combat fine dust effectively with PM-Tec® filter bags laminated with a high-performance ePTFE membrane. Designed to separate even submicron range particles, these bags promise low emission levels, excellent cleaning properties, and long service life—a must-have for industries ranging from cement to pharmaceuticals. ...
Manufactured by:Porvair - Filtration Group based inFareham, UNITED KINGDOM
An advanced patented metallic filter media that combines the strength of the sinter bonded metal powder with the levels of filtration efficiency associated with ...
Manufactured by:PM Pumpmakers GmbH based inSankt Veit an der Glan, AUSTRIA
To store water in an elevated tank for pressure generation and further supply of water. Imagine how easy it would be to erect a water tower and store a steady supply of water in an elevated tank without labour-intensive concrete or construction works. The PM Water Tower, a fully equipped water tower with a height of 6, comes in just a single ...
Manufactured by:PM Industries based inMumbai, INDIA
Stainless steel 304 flanges are made using steel, which has 8% nickel and 18% chromium in its chemical composition. In simple language, this steel is known as austenitic stainless steel. The basic composition of these two most important components provides great protection and strength to the instrument that is being made using ...
Manufactured by:PM Industries based inMumbai, INDIA
Duplex steel (UNS S31803) is one of the toughest grades of all time. The flanges are specially constructed from this grade to deliver timeless services. This grade is also famously known as Alloy 2205. The flanges are built to provide a wide range of applications and to showcase extraordinary qualities. Duplex Steel UNS S31803 Flanges are enriched with multiple characteristics, such ...
Manufactured by:PMS Instrument Company based inAlbany, OREGON (USA)
Model 670 Pressure Chamber Instrument is unique in our instrument line due to the large chamber. The chamber is 4 inches in diameter and 7 inches deep. We only recommend this instrument if you are working with a large leaf since it takes a large amount of nitrogen to fill the chamber and makes working with smaller samples time consuming. If you are looking at making routine water measurements for ...
Manufactured by:PMS Instrument Company based inAlbany, OREGON (USA)
A Model 600-EXP Super Pressure Chamber supplies all necessary control and measuring of nitrogen pressure. A valve and external port allow the Model 600-EXP to switch from the internal chamber to the external Super Chamber. The instrument chamber can be used for making measurements of normal sized samples and the Super Chamber for doing work with large ...
Manufactured by:PMS Instrument Company based inAlbany, OREGON (USA)
Model 615D Pressure Chamber Instrument is our digital format of the Model 615. It is fully enclosed in a sealed case and comes with an easily removable tank. The instrument is fitted with a 40 Bar Digital Gauge that offers features such as backlighting and multiple pressure scales (Bar, MPa and ...
Manufactured by:PM Pumpmakers GmbH based inSankt Veit an der Glan, AUSTRIA
Submersible Solar Pump System to pump water out of water wells up to ...
Manufactured by:PM Pumpmakers GmbH based inSankt Veit an der Glan, AUSTRIA
Maintenance-free Hand Pump System to pump water by hand for wells up to 80m. Imagine how much easier it would be if hand pumps would be maintenance-free. The PM Hand Pump is salt water resistant to avoid corrosion, it can be installed at any new water well or effectively replace existing hand ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 µm. Larger sample volumes and ultra-low zero counts detect smaller excursions with more relevant statistical data, while shorter sample intervals speed up your analysis time. Respond immediately to contamination with real-time ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the new PMS Chem 20 Chemical Particle Counter is the world’s most sensitive particle sensor for high purity process chemicals. Extensive data on chemical distribution and packaging systems proves that the ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Save time and reduce operator error with the innovative portable MiniCapt® Mobile. Flexible accessories for wide variety of applications. Simplify compliance using this microbial monitoring system. Compliant with Annex 1, ISO 14698:2003 and ISO 17141. Antibacterial housing & touchscreen. Secure data management. Versatile accessories designed for a wide range of applications. Uses ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The AirSentry® II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board industrial computer with ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The AirSentry® II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of- use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central so ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Increase yield with the ultra-high purity gas particle counter HPGP 101-C. Ensure smooth processes with the only reliable in-line contamination monitoring for process gases at line pressure up to 150 psig. The HPGP is compatible with oxygen, hydrogen, and most non-toxic gases and can be used in many reactive gas monitoring applications. Ticked bullet point Reduce start up and validation time. ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
Sensitivity range: 0.3 - 5.0 µm - 2 Channels, Annex 1 solution. As part of a facility monitoring solution, the Airnet II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
LiQuilaz II optical liquid particle counter is a volumetric monitor with a variety of sizing sensitivities as low as 0.2 µm. It provides high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). Sensitivity range: 0.2 – 20 ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The BioCapt Remote Microbial Impactor is expertly designed to capture microbiologically viable particulates on a suitable media surface for later incubation and enumeration. With its precision-engineered slits, it ensures laminar flow, optimizing collection efficiencies in accordance with ISO 14698-1 ...