- Home
- Equipment
Refine by
Sigma Environmental Equipment & Supplies
49 equipment items found
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The SIGMA HD-LR (LONG RANGE) pipe crawler is specifically designed to inspect extra-long distances up to 5,577 feet in a single run. It is an extremely reliable, expertly designed steerable pipe inspection robot that is loaded with features. These units are one of the most advanced and affordable crawlers which can be used to inspect pipelines of extra ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The SIGMA 100 HD robotic pipeline camera stands as a complete full geared solution for inspecting pipelines, mainlines, and other applications that demand a sturdy inspection system. The cable drum houses a cable length of up to 1,640 ft and the modular and thought through design of the robot tractor allows pipeline inspections from 4" and up to 60" in diameter. SIGMA 100 HD is available in ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The SIGMA 200 HD advanced pipe crawler is an extremely reliable, expertly designed, steerable pipe inspection robot that is loaded with great features. These units are one of the most advanced and affordable sewer robots which can be used to inspect stormwater lines, sewer drainage and construction areas, duct work, pipe/gas lines, and industrial sites. This is perfectly suited to use in straight ...
Manufactured by:ProMinent based inBelrose, AUSTRALIA
Capacity range 17 – 144 l/h, 12 – 4 bar. The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process safety. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, even for Exe and Exde areas with ATEX ...
Manufactured by:ProMinent based inBelrose, AUSTRALIA
Capacity range 17 – 117 l/h, 12 – 4 bar. The Sigma / 1 Control can be used flexibly as an extremely robust motor-driven diaphragm metering pump. Excellent process safety and reliability is guaranteed with the patented multi-layer safety diaphragm. Highlights include removable control unit, adjustable metering profiles, as well as a variety of power end and control ...
Manufactured by:Sigma Space Corporation, a part of Hexagon based inLanham, MARYLAND (USA)
Complete Data System Utilizing APCS Card includes: Enclosurem, Acquisition Hardware, Software Driver Development Package, Test ...
Manufactured by:Sigma Space Corporation, a part of Hexagon based inLanham, MARYLAND (USA)
The Advanced Photon Counting System (APCS) card was designed to enhance and expand NASA’s Cloud Physics LiDAR (CPL) system. Since 2003, the APCS has been used in CPL, flying in both ER-2 and Global Hawk platforms. To date, it has flown in over 20 different field campaigns. The APCS card is also used as the primary data collection source for the Tropospheric Wind LiDAR Technology Experiment ...
Manufactured by:SIGMA Aquaculture based inShandong, CHINA
Due to the effect of centrifugal force, when the impeller rotates, the wind vane makes the air forward move and become a series of spiral movements. Spiral Air between the impeller blades will speed up rotates and sucks outside air into the side channel (via suction mouth). After the air is sucked into the side channel, it will be compressed and then return to between the impeller blades and ...
Manufactured by:Sigma Space Corporation, a part of Hexagon based inLanham, MARYLAND (USA)
Sigma Space creates custom, cutting-edge aerospace instrument systems for a wide variety of applications. Whether the task at hand is monitoring climate change or measuring topography, we collaborate with clients to design and build mission-critical ...
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The fully automatic Sigma 688 ST not only twists precise wires, but also automatically fixes both wire ends in the same process step for transport and further processing. The Sigma 688 ST automatic twisting machine enables the processing of wires, to twisting, to fixing the open wire ends in just one device. In this way, it meets all OEM quality requirements in a fullyautomatic overall process. ...
Manufactured by:Sigma Thermal, Inc. based inMarietta, GEORGIA (US) (USA)
Sometimes referred to as a weir bath heater, this is a slight variation of a traditional water bath heater that does not utilize a process coil. This type of heater is most commonly used as a direct fired reboiler for amine and glycol solutions. The bath vessel contains a fire-tube and a weir at the end of the fire-tube. The process fluid is circulated through the bath vessel in direct contact ...
Manufactured by:SIGMA Aquaculture based inShandong, CHINA
Reduced power cost: Benefits of Nano-Tube/aerotube/air hose technology include reduced energy costs, higher ratio of oxygen / kWh transfer due to fine bubbles. Because low air resistance combines with thousands of tiny pores on the tube, power consumption is low, performance of oxygen transfer is ...
by:Sigma Recycling Incs based inNORCROSS, GEORGIA (US) (USA)
Largest form of rubber recycling is of the tires. There are many industrial grade rubber as well which are recycled. Landfilling of tires is hugely dangerous with multiple environmental hazards, it is even banned in many countries. Amongst the primary functions of used tires is burning them for fuel in industrial kilns of manufacturing of Cement, Paper, Steel, etc. Tires reduced down to crumb ...
Manufactured by:Medical Wire & Equipment based inCorsham,, UNITED KINGDOM
Σ TRANSWAB® is the world’s leading liquid amies transport for automated and conventional processing. The original TRANSWAB® was the first commercially produced gel transport swab, and for many years has led the field for reliable microbiological specimen collection and transport. A programme of continuous development has kept TRANSWAB® ahead of changes in laboratory ...
Manufactured by:Sigma Thermal, Inc. based inMarietta, GEORGIA (US) (USA)
A convection style heater offers the benefits of a direct-fired heater while eliminating some of the drawbacks associated with radiant heat transfer. Radiant heat transfer can be undesirable in certain temperature-sensitive applications as radiant heat transfer tends to be more intense and unevenly distributed around the coil surface. Sigma Thermal’s convection style direct fired heater ...
Manufactured by:Sigma Laborzentrifugen GmbH based inOsterode am Harz, GERMANY
Compact and powerful – those are the characteristics of the Sigma 1-14 in a nutshell. The technical features include a maximum speed of 14,800 rpm and a maximum RCF of 16,163 x g with a capacity of 24 x 1.5–2 ml. Large buttons and a large, highly legible display make the Sigma 1-14 extremely easy to ...
Manufactured by:Sigma Laborzentrifugen GmbH based inOsterode am Harz, GERMANY
Like its partner Sigma 1-14, the refrigerated version is compact and has impressive performance figures. The Sigma 1-14K refrigerated centrifuge is the most compact refrigerated centrifuge commercially available and has a maximum capacity of 24 x 1.5–2 ml. Large buttons and a large, highly legible display make the Sigma 1-14K extremely easy to operate. It easily achieves +4°C at maximum ...
Manufactured by:Sigma Laborzentrifugen GmbH based inOsterode am Harz, GERMANY
Attractive design meets ease of use. The Sigma 1-16 is a breeze to use – you can even close the motorized lid lock with a single finger. Along with user convenience, the unit features a durable, low-maintenance stainless steel bowl. The maximum capacity of the Sigma 1-16 is 24 x 1.5–2 ml or 36 x 1.5–2 ml in a single batch at an RCF of more than 20,000 x ...
Manufactured by:Sigma Laborzentrifugen GmbH based inOsterode am Harz, GERMANY
Like the Sigma 1-16, the Sigma 1-16K refrigerated centrifuge is extremely easy to use with its motorized lid lock and has a durable, low-maintenance stainless steel bowl. The Sigma 1-16K also features a fan control that adjusts the fan speed according to the necessary cooling capacity, making it up to 60% quieter and reducing power consumption. At maximum speed the Sigma 1-16K reliably achieves ...
Manufactured by:Sigma Laborzentrifugen GmbH based inOsterode am Harz, GERMANY
Small, quiet and powerful – those are the hallmarks of the Sigma 1-7. This new small centrifuge is excellently suited to the separation of blood or urine samples. The compact size makes it ideal for medical practices, veterinarians and small laboratories. It can also be put to good use for environmental analysis and in various educational institutions, such as schools or universities. The ...