- Home
- Equipment
Refine by
Tethys Environmental Equipment & Supplies
27 equipment items found
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The CEM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the gases having a periodic structure like NH3, SO2, NO and ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The EXM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the gases having a periodic structure like NH3, SO2, NO and ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The EXM 500 is an extractive on-line gas analyser dedicated to continuous emission monitoring (CEM). This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years). It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys Process Optical DO Probe is based on proven Fluorescence Optical Technology suitable for most industrial application. It is rugged, without replacement sensor cap and having auto-cleaning feature. It is designed for submersible mounting in open basin. Optical DO probe is suitable for measurement of dissolved oxygen measurement in various water and waste water ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys Conductivity Sensor with ¾”NPT thread is a heavy-duty probe with Polypropylene body suitable for many industrial water application. Mounting thread allow for in-pipe (flow through) installations of conductivity sensor. These conductivity sensor offers excellent chemical and impact ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys Differential pH Sensor with 1 ½”NPT thread on both front & back is a heavy-duty pH probe with Ryton Polyphenylene Sulfide body suitable for many industrial water application. The differential design provides unsurpassed accuracy by virtually eliminating ground loops. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys Total Suspended Solid (TSS) Probe operate on the principle of single gap light absorption as a means of detecting the presence of suspended solids. The sensors incorporate self-cleaning optics via air or water jet. The application involves measurement of total suspended solids concentration from Mixed Liquor Suspended Solid (MLSS), Return Activated Sludge (RAS), Waste Activated Sludge ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
In regards of the new regulations defined by IMO (international Maritime Organization) in 2020, ships must continuously control their emissions from fuel oil combustion. Global Sulphur content shall not exceed 0.5 % in ships’ fuel oil unless an exhaust gas cleaning (EGC) system is provided. The wash water resulting from the cleaning of the scrubber used to reduce the amount of pollutants in ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The UV600TPTN is an on-line water analyser to simultaneously measure total phosphorus and total nitrogen based on a wet-chemical oxidation in compliance with EN ISO 6878 and Standard Methods 4500-P, 4500-N and 4500-NO3. It belongs to a family of analysers for total parameters: TP (Total Phosphorus), TN (Total Nitrogen) and TOC (Total Organic ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The UV400, based on a modular concept, allows to monitor simultaneously many different parameters for waste water or drinking water treatment plants as well as river monitoring stations. Each parameter corresponds to a specific optical module that can be selected by the user while ordering the analyser, depending on the application. Mainly based on UV spectroscopy, well known for its stability ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The UV500-Compact is a on-line water analyser based on a high resolution UV-visible spectrograph. It allows to monitor simultaneously many different parameters for waste water treatment plants or river monitoring stations with an excellent stability and low operating cost. The same spectrograph can measure organic matter, nitrate, colour, turbidity and ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The EL200 is a configurable water controller that can adapt to many different probes and configurations, mono or multi-channel, among pH, ORP, dissolved oxygen, conductivity, chlorine, turbidity, total suspended solid (TSS) and temperature. ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys full spectrum UV-Vis probe provides a simple way to measure a number of parameters among TSS, NO3, COD, BOD, TOC, UV254 and colour for surface water or industrial/municipal waste ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The UV500 ATEX, based on a modular concept, allows to monitor one or several parameters for process water, cooling water or waste water. The special enclosure and air purge system allows to use it on hazardous areas classified "Ex" like refineries and chemical plants. Based on UV spectroscopy, well known for its stability and low operating cost, the UV500 ATEX can measure parameters like ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The CEM500 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years) It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The CEM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) and also to chemical processes requiring low values of H2S. This new model is based on a multi-path flow cell of 1200 mm coupled to a high ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
The EXM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) anda lso to chemical processes requiring low values of H2S. This new model is based on a multi-path flow cell of 1200 mm coupled to a high ...
Manufactured by:Envirowater based inSantiago, CHILE
The UV400, based on a modular concept, allows many different parameters to be monitored simultaneously for wastewater or drinking water treatment plants, as well as river monitoring stations. Each parameter corresponds to a specific optical module that can be selected by the user when ordering the analyzer, depending on the application. Based primarily on UV spectroscopy, known for its stability ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys General Purpose ORP Sensor with ¾”NPT thread on both front & back is a heavy-duty ORP probe with Ryton body suitable for many industrial water applications. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of ORP Sensor. This ORP sensor offers excellent chemical and impact ...
Manufactured by:Tethys Instruments SAS - HORIBA Advanced Techno based inMontbonnot St Martin, FRANCE
Tethys Process Optical DO Probe is based on proven Luminescent Optical Technology suitable for most industrial application. It provides full featured performance, replaceable sensor caps, and long life. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of DO probe. Optical DO probe is suitable for measurement of dissolved oxygen ...