- Home
- Equipment
Refine by
Vanaire Environmental Equipment & Supplies
24 equipment items found
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Vanaire designs and manufacture corrosion resistant duct systems and Factory Mutual duct systems in accordance with the specifications set forth by the SMACNA Manual on Thermoplastic Construction. We guarantee substantial, leak-proof performance of Vanaire duct applications and effective functioning of the whole ventilation ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Vanaire designs and fabricates all types of Fume Hoods for a wide range of applications. Our Fume Hoods are available in standard configurations, ideal for most applications, as well as special custom configurations to meet your specific ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
A ball valve is mounted on top of each Saturation Tank. They vent a small amount of surplus air to avoid turbulence caused by large bubbles in the ...
Manufactured by:Vanair Manufacturing, Inc. based inMichigan City, INDIANA (USA)
Providing a full 40 CFM of air, at up to 175 PSI, the RC40 provides you with the most CFM for the cost in the market. Reliable and field-proven, the RC40 has been the go-to hydraulic driven reciprocating air compressor for mechanic and service technicians for over 10 years. Featuring an integrated cold weather package that will work in any type of climate, the RC40 has been designed to ...
Manufactured by:Vanair Manufacturing, Inc. based inMichigan City, INDIANA (USA)
The compact DR 310 Drill Module provides an impressive 310 CFM and 200 PSI of air power (8.4 m3/min and 13.8 bar). Ideally suited for shallow wells where low pressure, low flow is required, the module can be hydraulically or engine driven. Designed for easy maintenance when mounted on the vehicle the DR 310 is readily available and steadfastly supported by Vanair’s expansive service team to ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
ISO defines the coupling as “the driven components in a mounting kit that allow torque transmission from an actuator to the valve stem/shaft.” It’s the key transmitter of torque and should be considered as such. It is imperative that the coupling is designed and manufactured in a way that helps ensure alignment of the valve stem and the actuator drive; otherwise, it may result ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
The Aeration Pump discharges at 105psi, air is injected and dissolved in the Saturation Tank then carried to the Breakout Valve where a pressure drop is controlled by an adjustment of the handwheel on the Breakout Valve. This pressure drop causes saturated air to come out of solution creating a fine bubble ...
Manufactured by:Met-Chem, Inc based inCleveland, OHIO (USA)
Condition As Is. CFM Under 10,000 CFM. Reconditioning Option add $1,500. Warranty All reconditioned equipment comes with a 30 day ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Vanaire designs and fabricates corrosion-resistant PVC Centrifugal Fans and Blowers for a wide range of industrial and manufacturing applications. Our engineers are highly skilled in using Polyvinyl Chloride (PVC) plastics to create Fan and Blower Systems and other Ventilation Solutions. PVC is a non-toxic, durable and lightweight material that boasts of high-tensile strength, all while being a ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Cutting Edge FRP Fans and Blowers. Designed to deliver high blowing performance in the most abrasive industrial environments, Vanaire’s corrosion-resistant Centrifugal Fans and Blowers be built from Fiber Reinforced Plastic (FRP). This extremely durable housing prevents caustic air from corroding the Fan and Blower System. ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Vanaire has immense experience in designing and manufacturing of high efficiency fiberglass reinforced plastic duct systems for different industries. We are happily serving clients from across different industries and states providing them with reliable air scrubbing equipment. Vanaire FRP duct systems are fabricated from solid fiberglass reinforced plastic that doesn’t rust and guarantees ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
Pump Discharge Pressure Gauge in foreground with Air Injection Rotameters and Saturation Pressure Gauges in ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
Injected air volume is adjusted and monitored with one Rotameter per Saturation ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
100GPM and larger aeration pumps and motors are mounted on a subassembly which is attached to the main aeration skid via three spherical washers to reduce external force inputs that influence pump and motor ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
When discussing mounting kit designs, most of the concerns and conversations revolve around the strength and materials of the bracket and coupling. These components are indeed critical; however, when is the last time you discussed fasteners in detail? These often-overlooked components are trusted to unfailingly connect the bracket between the valve and ...
Manufactured by:VanAire Inc based inGladstone, MICHIGAN (USA)
Locking kits are used with automated valves to prevent valve rotation, i.e. “locking out.” This device is engineered to keep a valve in a safe, locked position, either open or closed. This allows the maintenance team to safely and securely work on other parts of the system without concern that the valve will be accidentally ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Custom Made PVC Fume Scrubbers to Suit Your Needs. Vanaire provides custom designed corrosion resistant PVC fume scrubbers, also known as PVC wet scrubbers. Polyvinyl chloride plastic is a cost-effective, lightweight, non-toxic, incredibly strong and substantial material that currently widely substitutes such building materials as metal, concrete or wood. Vanaire team of designers and engineers ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Custom Designed FRP Scrubbers. Vanaire is a leading designer, manufacturer and installer of custom built fiberglass reinforced plastic air scrubbers for industrial and municipal organizations. Our company fabricates FRP fume scrubbers in a wide range of sizes, shapes and configurations depending on client’s space limitations and needs. We construct air scrubbers in accordance with the ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
The PVC (Poly Vinyl Chloride) materials used in our manufacturing works are built tough, so tough that our manufacturing department knows they’ll facilitate a fabrication process that results in our highly endurable mist elimination equipment. As self-evidenced by this pairing of production expertise and material durability, Vanaire’s PVC Mist Eliminators are certain to endure and ...
Manufactured by:Vanaire based inLouisville, KENTUCKY (USA)
Vanaire specializes in the design and fabrication of Nitrogen Oxide (NO) acid scrubbers with unmatched capture and removal efficiency of NO emissions. Nitrogen Oxide is a corrosive and hazardous acid generated by a wide variety of industrial and manufacturing processes. At Vanaire, our engineering team is committed to designing and building nothing but the most reliable and effective air ...