- Home
- Applications
- waste recycling
Refine by
Waste Recycling Product Applications For The Aerospace Air Transport Industry
24 applications found
Aviation demands perfection. Every delay costs money, every regulation matters, and infrastructure failures aren't just inconvenient—they're potentially ...
ByLegacy Building Solutions, Inc. based in South Haven, MINNESOTA (USA)
Betts Envirometal is particularly active in the Aerospace industry, as this sector typically creates an array of wastes with relatively high residual values. Due to the chemical properties of certain precious metals (eg very high electrical conductivity of silver or malleability and inert nature of gold), they are often utilised in high-performance aerospace components. With our refining heritage, Betts Envirometal specialises in extracting maximum values from such wastes for the benefit of our customers. ...
ByBetts Envirometal based in Kidderminster, UNITED KINGDOM
Industry challenge: Be it die casting or electroplating - the automotive and aerospace industries generate large amounts of wastewater in various production processes that can contain a wide range of ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Morgan Ward NDT employs all non-destructive testing methods to inspect welded structures, sub-assemblies and machined components used in the nuclear, petrochemical, defence and general engineering sectors. We offer approved inspection services within our purpose-built NDT laboratories across the UK and many of our services can also be offered on site when products are too large or difficult to ...
ByMorgan-Ward (NDT) Limited based in Derbyshire, UNITED KINGDOM
Recycled plastic granules solution for automobiles ...
ByJairam Plastic Industries based in Rajkot, INDIA
Large amounts of waste are generated at airports – onboard aircraft, in catering kitchens, at the restaurants, in the shops and in the administrative offices. Dense air traffic requires fast, efficient waste handling, while also observing a number of safety regulations. The Envac vacuum system meets all ...
ByEnvac AB based in Stockholm, SWEDEN
Large catering kitchens at airports are operational more or less round the clock. They have to deal with enormous amounts of waste from incoming aircraft, food preparation kitchens and staff canteens. Compared with traditional manual refuse collection methods, an automated kitchen waste system is safer, more efficient, more hygienic – and cheaper in the long ...
ByEnvac AB based in Stockholm, SWEDEN
The historical use of Aqueous Film Forming Foam (AFFF), which contains PFAS, has led to possible implications to human health and the environment. AFFF is used in a variety of situations such as emergency response, fire suppression systems, and fire-fighting training. Over time, AFFF entered our environment and ultimately impacts airports, fire training sites, military bases, and more. As regulations are promulgated to address PFAS contamination, the airport community is facing pressure to begin the process to ...
ByECT2, a Montrose Environmental Group based in Portland, MAINE (USA)
Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential. Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. ...
ByChelsea Technologies Ltd based in Yately, UNITED KINGDOM
P-80 Lubricants are used in the manufacture, repair and maintenance of aircraft, spacecraft and defense systems and technologies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve assembly operations of rubber and soft plastic ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
Aerospace and aviation machining, welding, metal finishing, coating, and painting processes are complex and messy, often requiring clean rooms with precise temperature and humidity controls, as well as the need to isolate and capture contaminants via positive or negative pressure. But, expensive permanent enclosures aren’t efficient for alternating between short-term production projects and long-term constructions. What if you had a flexible clean air alternative that you could quickly deploy for existing ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)
The coatings, oils, coolants, and lubricants involved in aerospace and defense manufacturing can be challenging to manage. When you can’t reliably clean up your wastewater and fluids, you’re in constant peril: missed deadlines, strained budgets, rejected ...
ByTrucent based in Dexter, MICHIGAN (USA)
Advanced Software Solutions & Engineering Services to Launch the Space Industry into a New Era of Innovation and Technology. SoftInWay brings together expertise and imagination to support large organizations and startups in the realm of space exploration. Wherever reliability and careful planning are paramount, our comprehensive approach leaves no stone unturned as we design, analyze, and optimize individual components and entire systems. With a team of visionary thinkers, we have 25+ years of experience ...
BySoftInWay Inc. based in Burlington, MASSACHUSETTS (USA)
Elemental analysis is a generic term for a group of applications which deal with the analysis of a variety of materials (chemicals, liquids, polymers, waste material, etc.) for their elemental or isotopic properties. Typical examples of elemental analysis techniques where mass flow control plays a key role are Total Organic Carbon (TOC) or Total Organic Halides ...
ByAxetris AG based in Kaegiswil, SWITZERLAND
The aviation industry has revolutionized how we transport goods and materials, travel and enhance military prowess. While this is in many ways a positive note for our society and economy, the aviation industry faces many difficulties when it comes to mitigating potential hazardous material spills and putting proper stormwater management protocol in place. Airports and other aviation facilities are targets for inspection by local, state, and federal governing agencies making your Flight Based Operation (FBO) to be ...
ByContainment & Filtration Solutions based in Flower Mound, TEXAS (USA)
Activities and processes in the aerospace and defence industry and sub-industries can be divided into three basic categories: production, maintenance and cleaning. The aerospace and defence industry has strict rules and regulations for all categories and all products and parts will receive numerous surface treatments and cleanings during their lifetime. These activities and processes are water-intensive and generate environmentally harmful wastewater that cannot be discharged into sewers but must be disposed of ...
ByEnvotherm A/S based in Grindsted, DENMARK
Advanced Software Solutions & Engineering Services to Drive Innovation in the Aerospace Industry. In the dynamic landscape of aerospace tech, expectations soar for faster, more efficient, and environmentally friendly solutions. From new ideas in electric propulsion to promising alternative fuels and hypersonics, the industry is poised for remarkable leaps. However, growth in this field demands more than theoretical promise; it requires the right components and tools for practical design innovation. ...
BySoftInWay Inc. based in Burlington, MASSACHUSETTS (USA)
AeroThermal has extensive expertise in meeting the high-quality standards required by the aerospace industry. With over three decades of practical and technical experience, our team has designed and project-managed autoclave construction for leading global companies, with clients including Boeing, Airbus, BAE Systems, Lockheed Martin, British Airways and the RAF. ...
ByAeroThermal Group PLC based in Poole, UNITED KINGDOM
For automakers, staying competitive has never been more critical. With consumers wanting more fuel-efficient vehicles along with increased light-weighting demands and the evolving mobility ecosystem, automakers are turning to Novelis aluminum for innovative, sustainable solutions that enable the next generation of vehicles. We work alongside our customers from program development to launch, to create new products and processes to meet the industry’s evolving ...
ByNovelis Inc. based in Atlanta, GEORGIA (US) (USA)
Superalloys, i.e. high temperature alloy, usually are used in to the high temperature working environment (> 600℃) 。By materials, superalloys are classified as iron-base alloy, nickel-base alloy, cobalt-base alloy, molybdenum-base alloy, and Niobium alloy. According to formation process, superalloys are divided into deformation alloy, precision casting alloy and powder alloy. According to strengthening mechanism, superalloys can be divided into carbide-strengthening superalloy, solid solution ...
ByXuancheng Chieftech Metal Technology Co., Ltd. based in Xuancheng City, CHINA