- Home
- Applications
- water monitoring
Refine by
Water Monitoring Product Applications For The Chemical Pharmaceuticals Industry
18 applications found
Premium
For processes generating significant quantities of ammonia in the vent gas, ERG has experience scrubbing this into dilute sulphuric acid solution to make >25% ammonium sulphate solution suitable for sale as fertiliser. Using the V-tex® scrubber which operates efficiently with viscous and high density scrubbing solutions, the liquid effluent stream can be controlled to a high concentration of (NH4)2SO4, minimising the water content and maximising the revenue stream from this liquid effluent. The solution can ...
ByERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM
Premium
Chemical processes make very high demands on electronic pressure measuring instruments and hydrostatic fill level probes in two respects: processes may be complex with high dynamic pressures and fast changing temperatures the media are diverse and may be chemically aggressive, explosive, toxic, abrasive and sometimes also dirty and viscous. Add to this top safety requirements, especially in explosion hazardous plant and equipment and the absolute demand for top operational ...
ByBD|SENSORS GmbH based in Thierstein, GERMANY
The water from pharmaceutical companies can cause big troubles because of the high variability in their manufacturing processes. Depending on the kind of raw materials used, the effluents may even be toxic, hence why the most conflictive effluents have to be separated from the rest and not to be sent to the general ...
ByAguambiente based in La Cistérniga, SPAIN
The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the 'Treated effluent' is often well above the levels witch are applicable for wastewater in ...
ByWeidner Ireland Ltd based in , IRELAND
Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 jilina@sx-sk.com Cell: 0086 15809274235 Sonar Technology, External liquid indicator uses the ...
ByShaanxi SK Electronic Technology Co.,Ltd. based in Xi’an City, CHINA
The inherent flexibility of Procal analysers enables the instruments to be configured to meet Customer’s specific requirements. Their capability to monitor gas concentrations at elevated pressures and temperatures make Procal products ideal for process applications in the Chemical ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality ...
ByProMinent GmbH based in Heidelberg, GERMANY
On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive ...
ByLuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA)
Industry Challenge: The most common products here are plastics, pharmaceutical products, plant protection products, organic and inorganic base materials, chemicals and cosmetic products for everyday use. Ressources like water and air play an important role in chemical product manufacturing and purification processes. As a result, a vast variety of wastewater is generated, containing all kinds of residues from cleaning processes, pharmaceutical products, aqueous chemicals or dyestuffs. Legal requirements for the ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Whether you’re doing oil and gas, petrochemical, hydrocarbons, biodiesel and alternative fuels or related testing, the LABWORKS solution for Oil and Gas provides you with all of the functionality you need, in a web-based, state-of-the-art solution. The LABWORKS LIMS solution for Oil and Gas can also be used/interfaced with 3rd Party manufacturing production and inventory applications such as SAP. LABWORKS lets you manage specifications, assignable by customer, intended use, standards or other criteria, and ...
ByLabworks LLC based in Lehi, UTAH (USA)
Presence of colouring, additives, nonbiodegradable organic contents or presence of biological process inhibitors. Besides, they are highly corrosive which is why we manufacture our equipments using materials especially adapted to the working conditions. An effluent containing a great quantity of suspended and dissolved organic ...
ByToro Equipment S.L. based in La Cisterniga, SPAIN
Membrane introduction-mass spectrometry (MIMS), NIST chemistry web book, analytical chemistry, contaminated environmental water, real time, VOCs, parts per million ...
ByAspecMS Ltd based in Pentraeth, UNITED KINGDOM
We understand that keeping your supply chain efficient is key to improving productivity and reducing your unnecessary ...
ByOvarro based in Eckington, UNITED KINGDOM
We transport chemicals with ease in any industrial environment: ProMinent solutions store, transfer and meter substances at rates of 0.1 l/h to 40,000 l/h at a pressure of 2 to 3,000 ...
ByProMinent GmbH based in Heidelberg, GERMANY
ByMicroBioTests Inc. based in Gent, BELGIUM
K-S Filtration and Thermal Processing Products have been applied in chemical, petrochemical, food, pharmaceutical, and mineral processing plants. K-S Rotary Drum Vacuum Filters are used for dewatering slurries, cake washing, and clarification of liquid products in many industries. The K-S Horizontal Vacuum Filter allows for multiple cake washing stages and can process fast settling ...
ByKomline-Sanderson based in Peapack, NEW JERSEY (USA)