Show results for
Refine by
Water Pumping Equipment & Supplies
12 equipment items found
Manufactured by:AMS Analitica based inPesaro, ITALY
An important element in the control of the industrial process and the related impact that these companies produce on the environment is the control of emissions into the atmosphere to evaluate the quantity of pollutants released into the air during the various production cycles. To this end, AMS Analitica produces a complete line of sampling instrumentation and a range of accessories, capable of ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The AirCube HE sampler is able to satisfy the requirements foreseen by the EN-12341 and EN-14907 norms for PM10 and PM2.5 aerial-dispersed particles sampling, under the flow conditions foreseen of 38 liters per minute and is able of carrying out emissions samples both in the manual and in automatic mode thanks to the possibility of connection with the isokinetic parameter meter IsoFlow ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The era of samplings with long interminable settings can be considered over with the new AirCube COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The high-volume sampler considered as “reference sampler” is the same used in EPA directive (see section 40 Part 50.11) for the same application. With regard to medium-volume samplers, the recommended impactor is - in this case as well - the one directly referred to in section A of the above mentioned EPA directive (Annex A). These PM10 and PM2,5 impactors obtained the certification ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Dynamic diluter for emission gas sampling compliant with the requirements of UNI-EN 13649 part ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The new impactor models have been manufactured in full respect of features published in reference norms regarding impactor for PM2.5 dust particle fractionation, with the option of simple adaptor kits for interchanging between one sampler and another for extremely easy, versatile use. All sampling phase settings are programmable from electronic programming microprocessor and sampling can be set ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The Automatic Isokinetic Sampler AirCube COM2 ISO is available with new features in its range and flow control, its new winning design and its ulterior practicality and versatility in its ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Equipped with a single-head diaphragm pump with pulsation dampener with a flow range from 1 to 28 liters per minute and with the ability to electronically compensation for pressure drops up to 700 mm / Hg over the full effective sampling range. All sampling parameters such as flow rate, sampling time and temperature standardization, can be set from the main menu. The new Air Cube Basic-Extra ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The GasCheck Basic sorbent tubes sampling devices, should be connected with a portable AirCube sampling pump, in both models COM2-TH and Gas-Pro. Each GasCheck basic, consist of 6 sorbent tube sampling support for standar chemical sorbent tubes or thermal desorption 6,35 mm OD sorbent ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Easy, manual flow regulation and volumetric compensation, digital temperature revelation display. Maximum flux 25 liters per minute. Air Cube Basic: environmental sampler system for fixed positioned sampling. Suitable for total dust,breathable dusts, noxiousgases andtoxicvaporsdispersed in the air and chimney samples. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The sampling sequential system is the reply to continuous requests for an easier to use tool without any locating and installation issue. The system concerns a derivate in anodized aluminum reducing dust passage friction to the minimum guarantying maximum sampling ...
Manufactured by:AMS Analitica based inPesaro, ITALY
Easy to use, the Dustcheck DPM-1 PM sampler fit with all sampling needs. Based with a powerful aspirating diaphragm pump (the EPA version has built in a single head diaphragm pump) that allows the system to perform sampling in a constant flow option to compensate any pressure drop coming from overload samples. The new microprocessor capabilities allow the user to select and store in the memory up ...