Only show results in Texas? Ok

Water & Wastewater Applications

  • Premium

    Process cooling and industrial comfort applications solutions for plastic and rubber industry

    For this specific chiller applications which includes injection moulding , recycling, film blowing, extrusion, thermoforming and other applications HITEMA is able to grant high unit reliability and the cooling temperature control to achieve the targets of production capacity with also the aim to reduce the duration of production cycles and for energy and maintenance costs reduction.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Recycling equipments for shredding industrial plastics

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Process equipment and technology solutions for plasticindustry - polymers industry

    GIG Karasek stands for technology and plant engineering for the production, processing and recycling of polymers. We are able to offer tailor-made solutions for you. Do you have new applications, then contact us. We can also test your product in our technical center.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Plastic Fabrication

    Custom polyethylene tanks and storage

    By Protank Ltd based in Olive Branch, MISSISSIPPI (USA).

  • Recycling of Plastic

    For the recycling of plastic we offer a wide range of solutions:shredding, separation, granulating , cleaning , extruding.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Microwave Dehydration Equipment for Raisins

    Raisins are the fruits of grapes that are dried in the sun or dried in the shade. Grape is also known as Dragon Ball. Major producers in Xinjiang, Gansu, Shaanxi, Hebei, Shandong and other places. Harvest in late summer and early autumn, fresh or dehydrated. Eating a handful of raisins every day can improve anaemia due to deficiency, prevent cardiovascular diseases, prevent thrombosis and help digestion of gastrointestinal tract.

    By Shandong Leader Machinery Co.,Ltd. based in Tianqiao District, Jinan, CHINA.

  • Ice blasting technology for plastics

    Applications of Coulson Ice Blast in the Plastics sector: Ice General Mold and Tool cleaning Injections Molds Compression Molds Blow Molds Urethane Molds and Overspill Plate out and off-gasing Textured Molds and Embossing cooling rolls Thermoform Molds Extrusion dies Plastic injection Screws Clamshell aluminum molds for urethane foam Enhanced ice Removing Rust Removing paint High temperature pods

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • waterproofing material

    widely used in civil engineering like railway,highway and subway to stablize the ground and strengthen the compression resistant

    By junsheng machinery based in jiaxing, CHINA.

  • Dominator despackaging machines for Plastics containers and bottles industry

    Depackage and separate plastic containers and bottles from their contents using the Dominator depackaging equipment. Recovered liquids or products can then either be pumped to a holding tank or conveyed into a bin for further processing. Recovered plastics can then either be sent for recycling or sent for reprocessing. Packaged microwave meals, plastic water bottles, fruit juice drinks, HDPE containers, liquid paperboard, polymer bottles can all be depackaged successfully.

    By Rowan Food and Biomass Engineering Ltd based in Gloucestershire, UNITED KINGDOM.

  • Agitation and mixing solutions for polymer / plastics

    The key to understanding the production process of synthetic plastic, rubber, or fiber lies in the four principle methods commercially used in polymer production. All polymers and copolymers are made by either the use of one or a combination of methods. These methods are bulk, solution, suspension, and emulsion.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Industrial shredders system for plastic shredding sector

    Plastic is a versatile material. Characteristics range from tough polymer structures to extra-firm high-tech materials. Efficient size reduction requires experience and know-how. We are able to customise our machine designs to be suit your requirements, for example; process configuration, footprint and throughput, thereby creating the optimum solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Dewatering and water purification for plastic recycling industry

    The preparation of plastic waste is an important process both for protection of raw materials as well as for reduction of waste. In this context, BELLMER KUFFERATH systems can be applied for all kinds of operations containing wet preparation processes.

    By Bellmer GmbH based in Düren, GERMANY.

  • EDXRF spectrometers for plastic, polymers & rubber industry

    Plastics, polymers and rubber are combined with a variety of different additives in order to give them properties that are important for many different markets. These products are commonly analyzed as beads, which in their end form are pressed or molded into plaques.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Pumps for Isocyanate

    Isocyanate is one of the components in broadly all foam products such as foam mattresses, inner linings in cars, cushioning in car seats, chairs and sofas. The hard qualities are used for insulation of houses, machines, tubes, etc. There are various types of isocyanate, but common to all of them is that they react to the humidity of the air by forming very hard crystals, which wear out the pumps and mechanical seals, if any. For MDI (Isocyanate) it is recommended to use positive displacement pumps and the...

    By DESMI A/S based in Noerresundby, DENMARK.

  • Burn Off Ovens for Plastics, Fiber & Chemicals

    At Pollution Control Products, our burn off ovens are used for the safe removal of polymer buildup from expensive dies, molds, extrusion screws, breaker plates and other metal parts, eliminating the need for abrasives, toxic chemicals and their health and environmental risks. Below is a common application scenario for our ovens.

    By Pollution Control Products Co. based in Dallas, TEXAS (USA).

  • EDXRF spectrometers for coating thickness & thin films industry

    Quality control of coating and thin film analysis All industrial operations have processes in place to ensure efficiency and safety standards. Xenemetrix systems are perfectly suitable for complementing these processes.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you