- Home
- Equipment
Refine by
Pms Environmental Equipment & Supplies
18 equipment items found
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
Sensitivity range: 0.05 - 0.2 µm. The Ultra DI 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
High-technology manufacturing processes often require high-purity gases. The HPGP 101-C Ultra High Purity Gas Particle Counter provides reliable in-line contamination monitoring for process gases at line pressure up to 150 psig. The HPGP is compatible with oxygen, hydrogen, and most non-toxic gases and can be used in many reactive gas monitoring applications. It speeds the qualification of ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
Sensitivity range: 20 - 100 nm. 20 nm Online & Batch Sample Chemical Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The High Sensitivity Liquid in Situ (HSLIS-M100e) Chemical Particle Counter provides continuous, real-time particle monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF), and is included in Particle Measuring Systems’ (PMS®) complete line of liquid particle counters. Sensitivity range: 0.1 - 1.0 ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
Particle Measuring Systems’ HSLIS-M50e Deionized Water Particle Counter provides continuous, real-time monitoring of contamination. The instrument makes it easy to understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of the HSLIS Liquid Particle ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The LiQuilaz II E15P, E20, and E20P laser particle counters are volumetric monitors with sizing sensitivities from 1.5 – 125 µm. LiQuilaz II laser particle counters provide the same levels of accuracy, reliability, and repeatability that customers have trusted for many years. LiQuilaz II sensors feature both RS-485 and Ethernet network communications. The new Ethernet capability ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
LiQuilaz II optical liquid particle counter is a volumetric monitor with a variety of sizing sensitivities as low as 0.2 µm. It provides high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). Sensitivity range: 0.2 – 20 ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The AirSentry II AMC Monitoring family of ion mobility spectrometers for airborne molecular contamination (AMC) from Particle Measuring Systems detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
AirSentry II Multi-point AMC Cleanroom Monitor Solutions from Particle Measuring Systems. The AirSentry II Multi-point AMC Cleanroom Monitor is the most advanced airborne molecular contamination (AMC) system available, using sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. This Particle ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The IsoAir 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with a ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
Sensitivity range: 0.3 - 5.0 µm - 2 Channels, Annex 1 solution. As part of a facility monitoring solution, the Airnet II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The CLS-700 T corrosive liquid particle sampler from Particle Measuring Systems (PMS) is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The High Sensitivity Liquid in Situ (HSLIS-M65e) Liquid Particle Counter provides continuous, real-time monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF). Sensitivity range: 65 - 200 ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The UltraChem 40 Chemical Particle Counter from Particle Measuring Systems gives you reliable liquid particle monitoring with the ability to detect 40 nm particles. This liquid particle monitoring solution is part of Particle Measuring Systems’ (PMS) complete line of particle counters for air, water, and chemical particle ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The Lasair III 110 Inline is a laser diode-based true 0.1 µm particle counter with 1.0 CFM flow rate. The Lasair III 110 Inline micron particle counter is perfect for critical locations where continuous, uninterrupted 0.1 micron monitoring is needed. It offers particle count testing for cleanroom environments and is part of the series of cleanroom particle counters from Particle Measuring ...
Manufactured by:Particle Measuring Systems (PMS) based inBoulder, COLORADO (USA)
The Lasair III Cleanroom Particle Counter is designed with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is ...