- Home
- Equipment
Refine by
Buhler Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
Long-term heat treatments of alloys and compounds in high vacuum or inert gas. Double-walled, water-cooled high vacuum chamber with tungsten heating elements and heat shields. Max. temperature: 2400°C. Pyrometric temperature measurement (option). Incl. power and control ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
Laboratory scale system for max. 5 or 10 g per run. Copper spinning wheel ø 200 mm. Complete system consisting of a high vacuum chamber, rack system, adequate high vacuum pumping system (including turbomolecular or diffusion pump), and RF generator (different models available, 5 - 6 ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
For controlled, inductive melting and alloying in high vacuum or argon gas atmospere. Water-cooled copper tube with moulds for max. 20 g, encapsulated in a quartz tube so as to be vacuum tight. Optimized homogenization of metals with low or different melting points. Induction coil with linear guide across the sample for intensive mixing. Fast pump-down times. Compact system in a moveable rack ...
Manufactured by:National Recovery Technologies, Inc., (NRT) based inNashville, TENNESSEE (USA)
The ultimate sorting solution for processors with difficult sorting requirements. Breaking the mold – featuring Bühler’s most sophisticated and versatile sorting capabilities, the innovative SORTEX A range is the first choice for processors with the most challenging sorting ...
Manufactured by:Buhler Group based inUzwil, SWITZERLAND
Our chain conveyor LBCB sets standards in versatility and performance. The wide range of its accessories allows the safe and gentle handling of grainy and floury ...
Manufactured by:Buhler Group based inUzwil, SWITZERLAND
Taking your raw materials from different kinds of intake systems and storage hoppers, our screw conveyor solutions are designed around your process. They hygienically transfer your raw materials to the differential dosing scale and then smoothly feed into your production ...
Manufactured by:Buhler Group based inUzwil, SWITZERLAND
The MKSB's modular discharge system gives you total flexibility, whether you need a tipping station or a combined station for different sized bags. Hygiene and safety are a priority, with a sealed stainless steel design and easy-to-clean ...
Manufactured by:Buhler Group based inUzwil, SWITZERLAND
The ASU and ASA air cleaners remove dust and light particles from grain, corn, malt, and other food products. They have separate discharges for dust and light particles and help to reduce dust and dust ...
Manufactured by:Buhler Group based inUzwil, SWITZERLAND
Our chain conveyor AHKG Heavy-Duty Line is designed for horizontal conveying at high throughputs of up to 1200 tons per hour. It is used in material intake stations as well as for downstream distribution or ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
The shaker KM CO2 made of stainless steel was especially designed for use in incubators with up to 20% CO2 concentration and up to 95% humidity. This guarantees the optimum development of your cell cultures. Because of the ribbon cable a feedthrough is not required in the ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
The shaker KM CO2 made of stainless steel with orbital shaking motion was especially designed for use in incubators with up to 20% CO2 concentration and up to 95% humidity. This guarantees the optimum development of your cell ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
XRD chamber for operation in well-defined atmospheres (e.g. inert gas, N2, air, oxidative mixtures up to 1 bar) or in high vacuum down to 10-5 ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
Designed for melting samples of approx. 5-20 g up to 3500°C, sufficient for most laboratory purposes. Small melting chamber ensures fast evacuation and low gas consumption. Freely movable, water-cooled electrode. Dismountable, water-cooled copper crucible plate with trough-shaped moulds. Crucible plates with customized moulds on request. Reliable, contactless ignition of the arc. Powerful arc ...
Manufactured by:Edmund Bühler GmbH based inBodelshausen, GERMANY
Well suited for crucible-free melting of reactive alloys with high melting points (max. 2500°C) (levitation melting). Splat size: thickness 20 – 100 µm and ø 10 – 30 mm, depending on the sample volume. Special compact RF generator (5 kW), optimized for levitation melting. Cooling rates of up to 106 ...
Manufactured by:Buhler Group based inUzwil, SWITZERLAND
The trough screw conveyor NFAT is used as a collecting or distributing conveyor. It is used to transport fine- and coarse-grained products such as grain, flours, and compound feed vertically or ...