- Home
- Equipment
Refine by
Dickow Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type HZAR is a single or multi-stage centrifugal pump according to API 610, type BB4, with axial suction port. To achieve very low NPSH values, the suction stand is designed with an axial inlet and the suction side impeller with an enlarged inlet cross section. The axial thrust compensation takes place through relief boreholes and throttle gaps, while running and split rings are standard on the ...
Distributed by:PREMATECNICA based inMadrid, SPAIN
Process and magnetic coupling. For all types of fluids, specially hydrocarbons and high temperature thermal oil (up to 400°C). API ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type SCMB is a single or multi-stage self-priming horizontal side channel pump. In addition to the self-priming ability side-channel pumps have the advantage due to their high pressure factor, to work at relatively low pressure levels more economical than conventional centrifugal pumps when conveying small flow rates. Due to the axial suction port and the upstream radial impeller, the SCMB type ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type SMV is a single-stage, self-priming side channel pump in a vertical position with opposing suction and discharge ports. In addition to the self-priming ability side channel pumps have the advantage due to their high pressure factor to work more economically when pumping small flow rates against relatively high pressure level than normal centrifugal pumps. The atmosphere is sealed by ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
The type NCT is a spiral casing submersible pump with shaft seal according to the principle of the two-pipe pump, i. separate shaft guide tube and pressure tube. The hydraulic pump part is arranged in the container or in the pumped medium. The connection is made by a multi-level shaft and pipe string. The bearings of the pump and drive shafts are in plain bearings. The upper drive shaft is fixed ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type HZ is a single or multi-stage centrifugal pump with shaft seal. To achieve low NPSH values, the suction stand is designed as an inlet spiral and the suction side impeller with an enlarged inlet cross section. The axial thrust compensation takes place through relief boreholes and throttle gaps, wear rings are standard on the suction and pressure sides. The bearing of the pump shaft takes ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type SC is a single or multi-stage self-priming horizontal side channel pump. In addition to the self-priming side-channel pumps have the advantage due to their high pressure factor, to work at relatively low pressure levels more economical than conventional centrifugal pumps when conveying small flow rates. Due to the axial suction supports and the upstream radial impeller, the Type SC achieves ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type GML is an internal gear pump with magnetic coupling. The pump has only two moving parts, the impeller and the rotor. In this case, the feed wheel is taken from the driven rotor. The delivery liquid is drawn into the remaining free space between the tooth flanks of the delivery wheel and the rotor. The crescent-shaped sickle opens up the gaps between impeller and rotor, while ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type KMB is a volute casing pump with housing dimensions according to ISO 2858 and simple magnetic coupling. The size selection is limited. The pump has a permanent magnet coupling, and the containment shell hermetically seals the fluid to the outside. The bearing of the pump shaft takes place in a SiC plain bearing. The direct mounting of the drive motor eliminates additional bearings and the ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type GMB is an internal gear pump with magnetic coupling. The pump has only two moving parts, the impeller and the rotor. The pump is always equipped with an easily adjustable safety valve (bypass). The pump has a permanent magnet coupling, and the containment shell hermetically seals the fluid to the outside. An internal circulation current dissipates the heat generated by the eddy current ...
Manufactured by:Dickow Pumpen GmbH & Co. KG based inWaldkraiburg, GERMANY
Type NCL is a standard chemical pump PN 16 according to ISO 2858. Adapted from the characteristic diagram sizes and the requirements of the operator, it is graded so that the best possible efficiency is achieved. This pump is a single-stage, single-flow volute casing pump in process design, with axial suction port and centered, vertically upwardly pointing discharge port. The axial thrust ...