Waste And Recycling Equipment With Screening Equipment And Filters For Power Plants Applications
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The water enters the BOXWIP concrete pit through the upstream aperture, flows through the bar rack which is periodically cleaned by a wall-plate mounted “CV” type rake. The wall-plate is slid into the wall ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
BEAUDREY has the capacity and the experience to successfully renew any existing screening plant, debris filter installation or on-line tube-cleaning ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
This feeds the backwash spray-water pipes of the rotating ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The wash-water and debris from the screens run in a deck flume and reach the debris collection ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The debris filter backwash water flow is rather high compared to that of rotating screens and the water returns under pressure to the condenser outfall ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
BEAUDREY supplies and installs the necessary control cabinets for its supply. BEAUDREY can meet any customer-imposed standard for instruments, computers and ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
There are two main types of cathodic protection systems BEAUDREY can ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
As shells and marine life tend to grow in the grouted stoplog guides, BEAUDREY can supply a heavy guide scraper frame which is lowered into the guides. Its blades scrape off the shells and growth which have adhered to the surface. After having used the scraper, gate lowering and sealing capacity are much ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
By-pass valves are an optional feature for drum screens and all types of travelling band screens (except for the thru-flow ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The mesh is secured on the panel frame that is slid into the grouted metal wall guides. The water flows across the mesh and the debris are arrested. The screen is lifted out and cleaned when the water flow is interrupted. Installing a second panel in series with the first one makes it possible to lift the panel out for cleaning without interrupting the flow or the screening. Such filters are not ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
Installed across a channel in which the water to be cleaned flows through. The screen consists of a set of rectangular screening mesh panels, carried by two endless chains. The downstream panels travel down into the water, around the bottom and up again along the upstream side. The water flows across the upstream and then the downstream panels. The debris are arrested on the upstream face. The ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The drum screen is installed in a concrete chamber between two parallel side walls with large apertures. The drum consists of a cylindrical rotor with a cylindrical surface made of side-by-side rectangular mesh panels. The rotor has two bearings and a drive at deck level. The panels travel down into the water. The water flows into the inside of the drum screen via the two side-wall apertures and ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
Stoplogs are used to shut off water intake screen pits for dewatering. They are normally lifted with equal levels upstream and ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
"R" Rakes are installed in the screening plant upstream of the travelling screens or the drum screens. The water flows across the inclined bar rack where the debris are arrested. The trash collecting rakes are held on two endless chains. They travel down, well clear of the bar screen, run around the bottom rail meshing between the bars. The debris are removed and loaded into the trash collecting ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The BEAUDREY ZBLR ball-catcher consists of a flanged spool piece in which a curved, fixed, concave ball-arresting bar screen is installed. It cannot be by-passed by the balls. An oscillating raking arm with a comb sweeps the balls towards the ball-collection boxes on each side of the rack from where they exit towards the ball-handling skid which comprises the ball pump, the ball counter and ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The efficiency of a condenser tube-cleaning system is dependent on the quality of the cleaning balls injected to clean the tubes. The sponge balls have a diameter that is slightly larger than the ID of the condenser tubes, allowing them to have constant contact with the tube walls. The balls gently scrub and sweep the tubes as they move through ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
BEAUDREY has pioneered in the field of fish protection over the past 60 years. Many systems have been developed over the years; they have been constantly adapted to meet the evolving constraints with regards to environmental ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The BEAUDREY “W” debris filter is installed at the inlet of a condenser to arrest all debris that may obstruct or interfere with the cooling water flow in the condenser tubes and with the eventual downstream tube-cleaning system. The debris are those that have by-passed the intake screens or grown past them in the pump pits and culverts (seaweed, grass, shells, eels, etc). Debris ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
One or more inclined bar racks are installed side-by-side (15° incline) at the plant inlet. On deck, a gantry rail supported by a set of vertical posts, follows the edge of the deck. The carrying trolley runs on the gantry rail. It is fed by a festoon cable system which also runs on the gantry rail. The rake has three cable drums: two to lower and lift the rake, one to open and dose the trash ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The BEAUDREY microstrainer is a horizontal, motor-driven drum screen covered in very fine mesh. It rotates between two wall-plates. The water enters the drum, flows through the mesh on which the particles are arrested. The drum rotates and the particle-laden mesh travels upwards out of the water. On reaching the top, it is back-washed by 1 or 2 low-pressure spray pipes with fantail jet nozzles. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you