Elgin Separation Solutions

7 products found

Elgin Separation Solutions Products

  • Waste Management

  • Elgin - Model CSI-03 - Vertical Cuttings Dryer

    Elgin - Model CSI-03 - Vertical Cuttings Dryer

    CSI™ is the industry’s most recognized & reputable Vertical Cuttings Dryer Centrifuge available in the market. No other brand has achieved more success or recovered more drilling fluid than the CSI™ dryer.  Designed to reduce oil on cuttings by up to 85%, The CSI-03 is the perfect solution for processing 25 to 40 tons per hour.

  • Elgin - Model CSI-04 - Vertical Cuttings Dryer

    Elgin - Model CSI-04 - Vertical Cuttings Dryer

    CSI™ is the industry’s most recognized & reputable Vertical Cuttings Dryer available in the market. Capable of reducing oil on cuttings to meet environmental regulations, including EPA Gulf of Mexico discharge requirements. Proven reliable technology, well average can achieve below 5% OOC. Every major solids control & waste management service provider in the market operate CSI™ dryers (Including, but not limited to Baker...

  • Elgin - Model CSI-D3 - Vertical Cuttings Dryer

    Elgin - Model CSI-D3 - Vertical Cuttings Dryer

    Elgin’s CSI-D3™ VCD brings direct-drive technology to the industry leading vertical cuttings dryer on the market.  Capable of processing oil-based or water-based waste without the need for a conversion kit at 25 to 40 tons per hour.  The CSI-D3 is the perfect solution for processing clay-based waste cuttings in today’s operations. By incorporating a proprietary assembly that includes an alignment compensating drive shaft,...

  • Elgin - Model CSI-D4 - Vertical Cuttings Dryer

    Elgin - Model CSI-D4 - Vertical Cuttings Dryer

    Elgin’s CSI-D4™ VCD is the world’s first, and patented, dual-drive dryer. This technology allows operators the ability to adjust the performance of the dryer based on the nature of the solids that are being fed to it. Using a combination of proprietary gear boxes, operators can adjust both the applied G-force and the dwell time between the scraper flites and the screen. This technology allows the CSI-D4™ to be used in both...

  • Elgin - Model Hyper-G - Drying Shaker

    Elgin - Model Hyper-G - Drying Shaker

    Elgin Separation Solutions is a leading manufacturer of effective drying shakers. Designed to further treat waste cuttings after initial processing to reduce disposal costs and recover valuable drilling fluid. Fully welded seams provide durability and improves performance during operations. Combined with Elgin’s own line of composite screens, this shaker is the perfect solution for today’s operators.

  • Elgin - Model CSI-D4 - Turn-Key Cuttings Waste Management Systems

    Elgin - Model CSI-D4 - Turn-Key Cuttings Waste Management Systems

    Elgin’s CSI-D4™ Fully-Integrated, Turn-key Vertical Cuttings Dryer (“VCD”) Cuttings Waste Management System is the industry’s most sophisticated waste solids management system available. This system has been designed to reduce drill cuttings and waste solids moisture by 90%. This allows operators to recover thousands of gallons of drilling fluid and/or water that would normally have been disposed of with the waste...

  • Elgin - Model CSI-D3 - Turn-Key Waste Cuttings Management System

    Elgin - Model CSI-D3 - Turn-Key Waste Cuttings Management System

    Elgin’s CSI-D3™ turn-key waste cuttings management system is the world’s first patented dual-drive dryer. This technology allows operators the ability to adjust the performance of the dryer based on the nature of the solids. Using a proprietary gear box configuration, operators can adjust both the applied G-force and the differential speed between the scraper flites and the screen. This technology allows the CSI-D3™ to be used...