- Home
- Equipment
Refine by
Inertial Labs Environmental Equipment & Supplies
39 equipment items found
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The FT742 Surface Mount wind sensor is designed for OEM integration. It has an electronic compass and a thermostatic heater. The sensor has been integrated into UAVs, military vehicles, autonomous robots, handheld weather stations, CBRN detection units, drifter buoys, and vehicle-mounted and ship-based meteorological systems. The hard anodized aluminum body is highly resistant to electromagnetic ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs MEMS TAA-308, TAA-315, and TAA-340 are revolutionary, compact, self-contained, strap-down, Navigation-grade Accelerometers that measure linear accelerations with high precision due to their unique design and developed by Inertial Labs over the last twenty years of significant knowledge and techniques in calibrations of inertial sensors. Measured by TAA Accelerometers, ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs Weapon Orientation Module - WOM provides a level of performance previously unseen in the world of miniature 3DOF orientation sensors. WOM employs the use of three axes each of gyroscopes, accelerometers, and magnetometers to track both slow and fast movements of weapons in real-time. With fully embedded capabilities to calibrate against soft- and hard-iron interference present ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs Optically enhanced Weapon Orientation Module - OptoWOM -II, is Inertial Labs' second generation of its Optically Enhanced Weapon Orientation Module. OptoWOM™-II combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of operation in virtually any environment. With the addition of optical image ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
Inertial Labs Attitude and Heading Reference System, AHRS-10 is a high-performance strapdown system that determines absolute orientation (heading, pitch and roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs Attitude and Heading Reference Systems, AHRS-II is the next generation of enhanced, high-performance strapdown systems that determines absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
LiDAR RESEPI GEN-II with Ousters OS1-64 REV7 is one of the latest offerings from Inertial Labs and one of the most powerful. This lightweight LiDAR features multiple scanning modes and operational workflows that allow users to control their collection procedures and accuracy. With an extended vertical FOV of 45° and compact design, you can be confident that your projects can be completed with ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertia I Labs GPS-Aided Inertia I Navigation System (INS-B-OEM) is OEM version of new generation, fully-integrated, combined GPS, GLONASS, GALILEO and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity and Orientation are ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The INS was unveiled in 2001 when Inertial Labs started manufacturing its first MEMS-based, IP67 and IP68 sealed and OEM versions, MIL-STD-810G qualified multiple interfaces and COM ports Single and Dual Antenna GPS-Aided Inertial Navigation Systems (INS). Each INS contains an Inertial Labs developed Tactical or Industrial-grade Inertial Measurement Units (IMU) and reliable single or dual GNSS ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Professional Inertial Labs GPS-Aided Inertial Navigation System (INS-P-OEM) is the OEM version of Inertial Labs' new generation, fully-integrated, combined GPS, GLONASS, GALILEO, QZSS, NAVIC and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
INS-DU-OEM: Low Cost Ublox Based GPS-Aided Inertial Navigation System Utilizing ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Remote Sensing Payload Instrument - RESEPI was designed as a cost-effective solution for extremely accurate Remote Sensing applications. RESEPI utilizes a high-performance Inertial Labs GPS-Aided Inertial Navigation System (INS) with Novatel RTK/PPK single or dual antenna GNSS receiver, integrated with a Linux-based processing platform. The processing platform contains a WiFi interface, ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
Models: Dual Antenna, Dual Antenna u-blox GNSS Inertial Navigation System. Heading Accuracy: 0.2° (2m baseline) / 0.4° (1m baseline). Position Accuracy: 0.5cm (PPK), 1cm (RTK), 60cm (SBAS). Pitch & Roll Accuracy: 0.05° dynamic, 0.08° static. GNSS Constellations: BDS, GAL, GLO, GPS, QZSS. Corrections: PPK, RTK, SBAS. Type of IMU: MEMS, Industrial-grade. Magnetometer: Embedded ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs GPS-Aided Inertial Navigation System (INS-D/DL-OEM) is OEM version of new generation, dual GNSS antenna, fully-integrated, combined GPS, GLONASS, GALILEO and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity, ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs GPS-Aided Inertlal Navigation System (INS-DH-OEM) is an OEM version of the new generation of dual GNSS antenna, fully-integrated, combined GPS, GLONASS, GALILEO and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Railway Motion Control Unit – RMCU is a high-performance strapdown system developed for Railway applications to determine the absolute orientation (Heading, Pitch, and Roll) and motion parameters (Angular Rates and Linear Accelerations) for any Railway Platforms on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs INS-DM-FI contains Inertial Measurement Units (IMU) utilizing Tactical-grade Fiber Optic Gyroscopes and MEMS accelerometers The INSDM-FI also utilizes embedded multi-constellation (GPS, GLONASS, GALILEO, QZSS, and BEIDOU) GNSS receivers like NovAtel OEM7 series, u-blox F9 or Septentrio mosaicH series. The design of the INS-DM-FI also includes an optional embedded Air Data ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The IMU-FI-200C Inertial Labs Inertial Measurement Unit is the latest addition to the Inertial Labs Advanced Inertial Measurement Units (IMU) family. Revolutionary due to its compact, self-contained strapdown, advanced tactical-grade Inertial Measurement Units, that measures linear accelerations and angular rates with three-axis tactical-grade, closed loop Fiber-Optic Gyroscopes (FOG) and ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs MEMS KERNEL Inertial Measurement Units & Digital Tilt Sensors are the second generation of the Inertial Labs KERNEL Miniature MEMS sensor-based family. Revolutionary due to its very compact, self-contained strapdown, industrial-grade Inertial Measurement Systems that measures linear accelerations and angular rates with three-axis MEMS accelerometers and three-axis MEMS ...
Manufactured by:Inertial Labs, a VIAVI Solutions Company based in20129, VIRGINIA (USA)
The Inertial Labs MEMS KERNEL-210 and KERNEL-220 Inertial Measurements are the third generation of the Inertial Labs Miniature MEMS sensor-based family. The KERNEL-210 and KERNEL-220 are revolutionary, compact, self-contained, strapdown, Tactical-grade Inertial Measurement Units that measure linear accelerations and angular rates with precision due to their aligned and calibrated three-axis MEMS ...