The Alpha and Beta aerosol beacon, BAB A7, is specially designed for work station monitoring during maintenance operations or in dismantling work sites, where man-made noise immunity is highly recommended. ...

CONTACT SUPPLIER

Showcase

Aerzen Delta Blower Generation 5 - Positive Displacement Blower

Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY

Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...

CONTACT SUPPLIER

Showcase

Weda - Model YT-600 - Remote Controlled Vehicle for Sediment (Sludge) Removal

Manufactured by:Weda Robotics based inSödertälje, SWEDEN

YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...

CONTACT SUPPLIER

Showcase

OPSIS - Model 400 - Emissions Monitoring, Process Control System

Manufactured by:OPSIS AB based inFurulund, SWEDEN

An OPSIS System 400 always contains emitter, receiver, optical fibre, and analyser. The system is offered in three different technical versions: System 400CS where the light along the monitoring path is sent directly through the gas channel ("Cross Stack"). System 400FL where the monitoring path is placed in a bypass line with fast gas exchange ("Fast Loop"). System 400HWE where a small flow of ...

CONTACT SUPPLIER

Showcase

SaphyRAD - Model MS - Multiprobe Survey Meter

Manufactured by:Bertin Technologies based inMontigny-le-Bretonneux, FRANCE

The SaphyRAD MS is a multiprobe survey meter with gamma dose rate measurement and contamination detection functions designed for military ...

CONTACT SUPPLIER

Showcase

Intecna - Sodium and Potassium Ferrate Production Plant

Manufactured by:Intecna srl based inMediglia (Ml), ITALY

Throughout the last ten years, several experimental works about the Ferrates laboratory and pilot production process and their application have been published. Ferrates showed a very high oxidant capacity, for the state of oxidation, especially for of the iron (VI) (SODIUM FERRATE), which sparked a remarkable interest in its applications both for disinfection and for especially difficult to be ...

CONTACT SUPPLIER

Showcase

IMR - Model 5000 - Continuous Emission Monitoring System

Manufactured by:IMR Environmental Equipment, Inc. based inSaint Petersburg, FLORIDA (USA)

The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 ...

CONTACT SUPPLIER

Showcase

Synspec - Model Delta 116 - Continuous Emissions Monitoring System (CEMS)

Manufactured by:Synspec BV based inGroningen, NETHERLANDS

Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...

CONTACT SUPPLIER

Showcase

Eco Physics SupremeLine - Model CraNOx II - Trace Gas Analyzer - NOx Analyzer

Manufactured by:ECO Physics AG based inDuernten, SWITZERLAND

With CraNOx II, ECO PHYSICS is launching the second generation of its high-end measurement solution in the ppb and ppt range. The new system is smaller and more sophisticated, as it now has the power to calculate the photostatic equilibrium by means of the integrated ozone analyzer. The CraNOx II system is capable of simultaneously measuring NO, NO? and NO2. Furthermore, it can be expanded to ...

CONTACT SUPPLIER

Showcase

Powertech - Model Mistkiller - Mist Collector

Manufactured by:Powertech Pollution Controls Pvt Ltd based inBangalore, INDIA

Mistkiller is a trademarked, high-efficiency centrifugal mist collector, designed, developed and manufactured for the control of most types of mist, generated by the use of water-based coolants or water-based liquids. Centrifugal mist collection system for capture and control of CNC coolant mist. ...

CONTACT SUPPLIER

Showcase

AirGen - Model ZA FID Air - Hydrocarbon Free Zero Air Generators

Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND

The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...

CONTACT SUPPLIER

Showcase

VOSS SingleSample - Model 91946-SW - Disposable Polyethylene Bailers

Manufactured by:Voss Technologies, Inc. based inSan Antonio, TEXAS (USA)

Product Code: 91946-SW, 1.5" x 36" weighted poly. Save time in the field and work smarter by using Single Sample Disposable bailers. Single Sample disposable bailers eliminate field cleaning and cross contamination. Features include an improved top and stainless steel weight design so they fill and empty as fast or faster than any other bailer on the market plus our patented, Dome Design top and ...

CONTACT SUPPLIER

Showcase

Idemag - Eddy Current Separator

Manufactured by:Idemag SL based inCastellbisbal, SPAIN

This equipment is designed to separate non-ferrous metals (aluminum, brass, copper) from the rest of the bulk stream. Taking into account that this type of metal does not interact with magnets, this separation is obtained creating a repulsive effect by rotating powerful neodymium magnets at high ...

CONTACT SUPPLIER

Showcase

Myron L - Model 900 Series - Multi-Parameter Monitor / Controller

Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)

Myron L Company’s new 900 Series Multi-Parameter Monitor / Controllers combine Accuracy, Reliability, Simplicity, and Flexibility. The user intuitive GUI (Graphical User Interface) allows easy and complete programmability of the instrument all from the LCD touch screen. These highly accurate instruments have the ability for simultaneous monitoring and controlling of multiple ...

CONTACT SUPPLIER

Showcase

Anguil LoCarb - Alternative Fuel Oxidizers

Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)

Anguil has decades of experience supplying alternative heating methods for oxidizer technologies. While the electrically heated Catalytic Recuperative Oxidizer (CATOX) is well established and widely applied, the industry has been slower to integrate lower carbon components like electric heating elements and hydrogen-fueled burners into the Regenerative Thermal Oxidizer (RTO), Direct Fired Thermal ...

CONTACT SUPPLIER

Showcase

Intecna Celdar - Electrocoagulation Wastewater Treatment Plants

Manufactured by:Intecna srl based inMediglia (Ml), ITALY

Innovative methods are continuously required in water purification of a wide range of wastewater pollutants especially in case of difficult approach, then several technologies have been developed for example, Electrochemical Wastewater Treatments. Electrocoagulation system optimised by INTECNA, provides a relatively compact and robust wastewater treatment plant alternative in which special alloy ...

CONTACT SUPPLIER

Showcase

Myron L - Model Ultrapen PT1 - Conductivity/TDS/Salinity & Temperature Pen

Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)

This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable ...

CONTACT SUPPLIER

Showcase

Zygo - Model Qualifire - Advanced Laser Interferometer

Manufactured by:Zygo Corporation - AMETEK, Inc based inMiddlefield, CONNECTICUT (USA)

For more than 50 years, phase-shifting interferometry has been the technology of choice for high-precision surface form metrology instruments. These interferometers provide fast and reliable measurements of surface form error and transmitted wavefront of optical components, systems, and assemblies. From research environments to a wide range of industrial applications, laser interferometers offer ...

CONTACT SUPPLIER

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you