- Home
- Articles
Refine by
Environmental Industry Articles & Analysis: This-Month
216 articles found
Urban redevelopment in constrained urban environments requires geosynthetics to stabilize soils, improve drainage, and support long-term infrastructure performance. Non woven geotextiles provide filtration, separation, and reinforcement within pavement systems and foundation layers. This case study examines the deployment of Ocean Non Woven Geotextile 150 GSM (Polyester) in the NBCC Sarojini ...
Black carbon emitted during automotive manufacturing can accumulate within facilities, presenting operational challenges and broader environmental concerns. Traditional emissions testing and stack measurements offer limited real-time visibility and may not capture short-term fluctuations or localized deposition on the shop floor.Real-time monitoring and high-resolution air quality data enable ...
As climate change continues to disrupt global weather patterns, the frequency and severity of flood events have increased dramatically. Floods not only threaten lives and property, but also impact infrastructure, agriculture, and economic activity on a large ...
Geomembranes are waterproof barrier materials derived from high-molecular-weight polymers, designed to meet project-specific containment and durability requirements. Polymer geomembranes are the dominant category in current practice, with asphalt geomembranes used in composite configurations where appropriate.Geomembrane TypesPolymer (Synthetic) Geomembranes: This category currently dominates the ...
The Coriolis Compact is a lightweight, battery-operated air sampler designed to capture bioaerosols directly in the environment, delivering samples fully compatible with PCR, culture, and sequencing workflows, with no liquid media required on-site.Independent validations span four distinct environments: SARS-CoV-2 detection in indoor settings, H5N8 avian influenza monitoring on poultry farms, ...
Hiden Analytical's Dual Zone mass spectrometry combines high-resolution mass separation with accurate partial-pressure measurement in a single instrument, addressing the challenge of separating species that share the same nominal mass in gas analysis. Systems such as HAL 101 X, DLS-20 and DLS-2 / DLS-2X enable this capability across vacuum science, materials research, catalysis and nuclear fusion ...
Triple A S.A. E.S.P., the utility supplying drinking water to approximately 15 municipalities in the Barranquilla region, has installed two MPC-Buoys at the Dársena Río Magdalena, a river intake on the Magdalena River, to address algae at the source before treatment.Context: Algae risk at river intakesThe Magdalena River is Colombia's primary freshwater source for Barranquilla and surrounding ...
INTRODUCTION Environmental Material Science ("LiORA") provides a new generation of Internet of Things (loT) enabled non-dispersive infrared (NDIR) water sensors that provide high-resolution quantification of groundwater (GW) petroleum hydrocarbon (PHC) concentrations. The current generation water sensor transmits data at 30-minute intervals using a 4-channel pyroelectric NDIR detector, along ...
ByLiORA
The Problem: This oil exploratory company generates wastewater in the process of cleaning oilfield tools used on offshore oil rigs. The tools are loaded with oil, solids, salts, and a variety of chemicals and metals. The tools are washed using a pressure washer then the water is collected and sent to the system for treatment through various ECE products and then the cleaned water is reused in the ...
The Problem: The company manufactures various types of fasteners for the aerospace industry. In the process of manufacturing, several waste streams are generated that contain oil, various metals, and solids. In order to save operating costs in the form of hauling charges, The company needed a way to treat the waste streams to allow for discharge to the local POTW. They also required to treat two ...
The Problem: A well known electrical components company manufactures electrical wiring components such as grounding rod clamps, wiring crimps, end connectors, distribution components, and a variety of other electrical parts. In this process, they generate a waste stream containing various metals including copper, zinc, and aluminum. The CF 200 system has been installed to remove the metals and ...
The Problem: A County Transit operates three bus maintenance facilities. Each facility generates wash wastewater in the process of cleaning buses. Engine degreasing, undercarriage wash, wheel cleaning, and general maintenance washing generate wastewater contaminated with oils, grease, and metals including Zinc and Lead. They needed a system that could remove the contaminants and purify the water ...
Over the last decade, business procurement has evolved significantly. Procurement is now a strategic corporate function, with new purchases needing to enhance performance while meeting increasingly stringent compliance, sustainability, and governance targets. Developments in AI and data processing are accelerating this evolution.One estimate suggests that the average business-to-business ...
When it comes to wastewater treatment, traditional aeration techniques do a good job at degrading all sorts of organic contaminants in wastewater. However, there’s an even better, more advanced aeration technology that takes wastewater treatment to the next level. It’s called the Nano-Bubbler. Unlike traditional aeration technologies that inject air to the water in an ineffective way ...
Wastewater treatment is a complex topic that involves numerous processes, components and equipment that all have the singular goal to turn any liquid into water that can either be reused or returned to the water cycle. There are even a lot of wastewater treatment systems that everyone from households to industries use to meet their wastewater treatment needs. These technologies include the ...
Industrial water pollution is a widespread problem throughout the planet. When harmful chemicals and compounds are discharged into water, the water becomes unsuitable for drinking and other uses. Although most of the Earth’s surface is covered by water, we can only obtain fresh water from water bodies such as ponds, lakes, rivers, streams, and reservoirs. This means that it’s in our ...
Facing tighter environmental and energy‑saving mandates, the central claim is that the asphalt drum mix plant manufacturer is focusing upgrades that directly lower emissions, reduce fuel consumption, and improve material efficiency—changes that increase the aftermarket value of asphalt plants for sale. Buyers should evaluate specific retrofits and factory configurations that target ...
ByMacroad
Rubber Tyred Gantry (RTG) cranes are widely used in ports, logistics yards, precast yards, and heavy industrial facilities for handling large and heavy loads. Unlike rail-mounted cranes, RTG cranes rely heavily on hydraulic systems to perform essential functions such as steering, braking, suspension control, and in some designs, lifting assistance. Because these systems operate under high ...
A Chemistry-Based Approach to Fly and Odor Control Abstract Persistent fly infestations and odor generation in agricultural, industrial, and municipal systems are commonly treated as surface-level sanitation issues. However, growing evidence suggests these challenges are rooted in the structural and microbial dynamics of biofilm. This article examines the role of biofilm as a foundational ...
The Problem: In the manufacturing of cardboard boxes, ink is used to print a client’s information on the container. During the change-outs of the printing press, the ink is washed off the printing roller to ready the process for the next client’s container. This washing generates a waste ink high in solids that in order to discharge the box manufacturer has paid excessive discharge ...