Metrohm AG

24 products found

Metrohm AG Products

  • Ion Chromatography

  • Metrohm - Model 940 Professional IC Vario - Modular High-performance System for Ion Chromatography

    Metrohm - Model 940 Professional IC Vario - Modular High-performance System for Ion Chromatography

    The limits of ion chromatography have yet to be reached. If you want to push them, the 940 Professional IC Vario is your solution of choice. Engineered for research and sophisticated method development, the 940 Professional IC Vario provides you with the ultimate flexibility you expect from an ion chromatograph. Experience the versatility of the 940 Professional IC Vario and put together the system for your application.

  • Metrohm - Model 2.889.0010 - 889 IC Sample Center

    Metrohm - Model 2.889.0010 - 889 IC Sample Center

    The 889 IC Sample Center is a robust Autosampler for high sample throughput, optimized for the challenges of the modern analytic laboratory. It works in accordance with the x-y-z principle and a syringe control with high resolution for precise sample injection. A double needle system enables the penetration of vessel caps and septa. A PEEK injection valve completes the automation system of the 889 IC Sample Center. It is the appropriate automation...

  • Metrohm - Model Eco IC - Ion Chromatography System

    Metrohm - Model Eco IC - Ion Chromatography System

    Discover Eco IC, an ion chromatography system that focuses on the essentials while not compromising on quality, robustness, and reliability. Eco IC has been developed to enable more users to benefit from this technique. Whether you need to perform routine water analysis or you’re looking for an instrument for higher education, Eco IC comes with all the components you need. In addition, you can also save time and reduce work by getting an...

  • Metrohm - Inline Sample Preparation (MISP) for Difficult Sample Matrices

    Metrohm - Inline Sample Preparation (MISP) for Difficult Sample Matrices

    Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and results.

  • Metrohm - Model 2.889.0020 - 889 IC Sample Center – Cool

    Metrohm - Model 2.889.0020 - 889 IC Sample Center – Cool

    The 889 IC Sample Center – cool is the appropriate automation solution when you have only a very small amount of sample. In comparison with the 889 IC Sample Center, it possesses in addition a cooling function and is thus the ideal sample changer for biochemically relevant or thermally unstable samples.

  • Metrohm - Model IC-MS and IC-ICP/MS - Coupling

    Metrohm - Model IC-MS and IC-ICP/MS - Coupling

    Combining IC with an electrospray ionization mass spectrometer (ESI-MS) or an inductively coupled plasma mass spectrometer (ICP-MS) solves even complex separation problems while achieving outstanding sensitivities and selectivities. These so-called hyphenated techniques provide valuable information for unambiguous peak identification and are less prone to matrix influences than IC with conductivity detection.

  • Metrohm - Model 2.136.0740 - LPG Module

    Metrohm - Model 2.136.0740 - LPG Module

    The LPG Module is a sample injection system for liquefied gases. The module is controlled automatically and moves the respective quantities of gas to the combustion oven for combustion. This product from Analytik Jena has been specially optimized for coupling with ion chromatographs.

  • Metrohm - Model TitrIC Vario pro III - Professional Hyphenated IC and Titration System with Lockable Sample Vessels

    Metrohm - Model TitrIC Vario pro III - Professional Hyphenated IC and Titration System with Lockable Sample Vessels

    TitrIC Vario pro III – The professional solution with closed sample vessels. Fully automatic system for direct measurement of temperature, conductivity and pH value, the titrimetric determination of p and m values, the determination of cations including calcium and magnesium, as well as anions by ion chromatography. The sample changer is equipped with the DisCover function for automatic sample vessel cover removal. The system consists of 856...

  • Metrohm - Model 2.136.0700 - Combustion Module (Oven + ABD)

    Metrohm - Model 2.136.0700 - Combustion Module (Oven + ABD)

    The Combustion Module (Oven + ABD ) enables sample digestion during pyrolysis and oxidation of all types of flammable samples. The Combustion Module is comprised of the combustion oven and the Auto Boat Driver (automatic sample introduction). Both are products made by Analytik Jena which have been optimized specially for coupling with ion chromatographs.

  • Metrohm - Model MMS 5000 - Autosampler

    Metrohm - Model MMS 5000 - Autosampler

    Autosampler MMS 5000 made by Analytik Jena for use with the Metrohm Combustion IC for fully automatic analysis of liquid and solid samples. To adapt the modular Multi-Matrix sampler to the correct sample type, either the liquids kit (6.7303.000) of the solids kit (6.7302.000) must be used.

  • Metrohm - Model 2.136.0730 - Combustion Module (Oven + LPG/GSS)

    Metrohm - Model 2.136.0730 - Combustion Module (Oven + LPG/GSS)

    The Combustion Module (Oven + LPG/GSS) enables sample digestion during the pyrolysis of liquefied gases and gases under pressure. The Combustion Module (Oven + LPG/GSS) is comprised of the combustion oven and the LPG/GSS module. Both are products of Analytik Jena which have been optimized specially for coupling with ion chromatographs.

  • Metrohm - Model 2.136.0720 - LPG/GSS Module

    Metrohm - Model 2.136.0720 - LPG/GSS Module

    The LPG/GSS Module is a sample injection system for either liquefied gases or gases under enhanced pressure. The module is controlled automatically and moves the respective amounts of gas to the combustion oven for combustion. The Analytik Jena product has been optimized specially for coupling with ion chromatographs.

  • Metrohm - Model TitrIC Vario pro II - Hyphenated IC and Titration System for Comprehensive Anion and Cation Analysis

    Metrohm - Model TitrIC Vario pro II - Hyphenated IC and Titration System for Comprehensive Anion and Cation Analysis

    Fully automated system for direct measurement of temperature, conductivity, and pH value, as well as for titrimetric determination of p value and m value. The cations (including calcium and magnesium) and anions are determined simultaneously with ion chromatography following Inline Ultrafiltration. Automatic calculation of the ion balance provides maximum confidence in the results. The system consists of 856 Conductivity Module, two 800 Dosinos, Rod...

  • Metrohm - Model TitrIC Vario pro I - Basic Hyphenated System for IC and Titration

    Metrohm - Model TitrIC Vario pro I - Basic Hyphenated System for IC and Titration

    Fully automatic system for direct measurement of temperature, conductivity and pH value; the titrimetric determination of p value, m value, calcium and magnesium and the determination of anions by ion chromatography. The system consists of the 856 Conductivity Module, four 800 Dosinos, 802 Stirrer (rod stirrer), 905 Titrando, 815 Robotic USB Sample Processor XL and 930 Compact IC Flex Oven/SeS/PP/Deg with sequential suppression and the 'iDetector'...

  • Metrohm - Model 2.136.0710 - Auto Boat Drive (ABD)

    Metrohm - Model 2.136.0710 - Auto Boat Drive (ABD)

    The Auto Boat Drive (ABD) automatically guides the sample boats into the combustion oven. The sample can be put into the boat manually or using an appropriate sampler. This product made by Analytik Jena has been specially optimized for coupling with ion chromatographs.

  • Metrohm - Model 920 - Absorber Module

    Metrohm - Model 920 - Absorber Module

    The 920 Absorber Module combines the Combustion Module with the ion chromatograph. The 920 Absorber Module ensures that the gaseous compounds of the analytes are dissolved and channeled to the IC. It is responsible for the entire Liquid Handling. In addition to Combustion IC, it can also be used for gas analysis.