Only show results in Connecticut? Ok

Air & Climate Applications

  • Premium

    Technologies for Wastewater Treatment in Dairy Industry

    Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Process cooling and industrial comfort applications solutions for air conditioning industry

    All buildings need air conditioning in order to obtained a good indoor environmental quality (IEQ) essential for the proper execution of the tasks and to assure a healthy environment of the occupants. Generally speaking, in the case of smaller buildings this can be provided by A/C units of each room, but once the building reaches a certain size it becomes cost-effective and more energy efficient to use a centralized system. This configuration normally uses “chillers” which are basically giant A/C...

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with the emission capture, control and compliance hurdles that both composite and carbon fiber producers face. So much so that we have developed specific technologies that address the unique needs of our customers in both industries. Please visit our Carbon Fiber Page to explore Anguil`s proprietary oxidizer designs for furnace and oven emissions. On composite applications, firms continue to battle emission levels by lowering styrene content in the resins they utilize. However,...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for automotive industry

    The production of a vehicle is complicated and includes lots of processes (cooling of machine tools, painting baths, cooling of mechanical and hydraulic components, molding machines etc..) with different kind of heat transfer, each with different range of temperatures involved.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Process cooling and industrial comfort applications solutions for plastic and rubber industry

    The kind of processes required in the plastic industries is very diverse (injection molding, blow molding, thermoforming, vacuforming etc..) and HITEMA can offer a great range of products to satisfy all customer needs.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Water & wastewater treatment solutions for food & beverage industry solutions

    Our best-in-class solutions serve the needs of a wide range of food and beverage manufacturers across the globe. Fluence has more than 30 years of experience in delivering water, wastewater, and waste-to-energy projects to the food and beverage industry across the globe. Our unique technologies provide best-in-class treatment for incoming ingredient water, reduce operating costs by turning waste into a resource, and help our customers enhance their products.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the stations.

    By EyeCGas -OGI by OPGAL based in ISRAEL.

  • Premium

    Temperature measurement and control devices for cement industry

    TTEC provides Temperature Measurement reliability for the Cement, Concrete & Construction Aggregates Industry. TTEC products provide the accuracy & stability that allow our cement industry customers to achieve the Batch Consistency & High Quality they require. TTEC Series 3000 Thermocouples provide high accuracy for KILN Temperatures to 2700°F (1482°C). TTEC Sensors are also utilized to provide reliable Preheater Tower, Heat Recovery & Stack temperature measurements. Our Cement Industry...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Temperature measurement and control devices for non-ferrous metals industry

    TTEC thermocouples are used in various Non-Ferrous Metals Industries to accurately measure high temperatures under harsh conditions. TTEC Series 2000 Industrial Assemblies are used to measure molten metal temperatures in smelting applications. TTEC Series 1000 TECPAK thermocouples are used in large processing facilities to provide accurate Furnace Temperatures. The TTEC # 10-3633 custom Thermocouple with ¼" NPT process thread is utilized for Reclaimer Temperatures in the Aluminum Industry.

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Analytical instruments for oil and gas industry

    When it comes to ensuring product quality and optimizing processes, identifying elementary impurities is absolutely essential for quality control laboratories in refineries and in the production of secondary fuels. We can provide you with a variety of detection solutions developed for industrial routine applications with very high sample volumes as well as for experimental laboratories with frequently alternating areas of focus in their chemical analysis. Analytik Jena’s diverse range of solutions keeps you...

    By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you