- Home
- Articles
Refine by
Environmental Industry Articles & Analysis: This-Year
495 articles found
Urban redevelopment in constrained urban environments requires geosynthetics to stabilize soils, improve drainage, and support long-term infrastructure performance. Non woven geotextiles provide filtration, separation, and reinforcement within pavement systems and foundation layers. This case study examines the deployment of Ocean Non Woven Geotextile 150 GSM (Polyester) in the NBCC Sarojini ...
As climate change continues to disrupt global weather patterns, the frequency and severity of flood events have increased dramatically. Floods not only threaten lives and property, but also impact infrastructure, agriculture, and economic activity on a large ...
Geomembranes are waterproof barrier materials derived from high-molecular-weight polymers, designed to meet project-specific containment and durability requirements. Polymer geomembranes are the dominant category in current practice, with asphalt geomembranes used in composite configurations where appropriate.Geomembrane TypesPolymer (Synthetic) Geomembranes: This category currently dominates the ...
Black carbon emitted during automotive manufacturing can accumulate within facilities, presenting operational challenges and broader environmental concerns. Traditional emissions testing and stack measurements offer limited real-time visibility and may not capture short-term fluctuations or localized deposition on the shop floor.Real-time monitoring and high-resolution air quality data enable ...
The Coriolis Compact is a lightweight, battery-operated air sampler designed to capture bioaerosols directly in the environment, delivering samples fully compatible with PCR, culture, and sequencing workflows, with no liquid media required on-site.Independent validations span four distinct environments: SARS-CoV-2 detection in indoor settings, H5N8 avian influenza monitoring on poultry farms, ...
Hiden Analytical's Dual Zone mass spectrometry combines high-resolution mass separation with accurate partial-pressure measurement in a single instrument, addressing the challenge of separating species that share the same nominal mass in gas analysis. Systems such as HAL 101 X, DLS-20 and DLS-2 / DLS-2X enable this capability across vacuum science, materials research, catalysis and nuclear fusion ...
Triple A S.A. E.S.P., the utility supplying drinking water to approximately 15 municipalities in the Barranquilla region, has installed two MPC-Buoys at the Dársena Río Magdalena, a river intake on the Magdalena River, to address algae at the source before treatment.Context: Algae risk at river intakesThe Magdalena River is Colombia's primary freshwater source for Barranquilla and surrounding ...
INTRODUCTION Environmental Material Science ("LiORA") provides a new generation of Internet of Things (loT) enabled non-dispersive infrared (NDIR) water sensors that provide high-resolution quantification of groundwater (GW) petroleum hydrocarbon (PHC) concentrations. The current generation water sensor transmits data at 30-minute intervals using a 4-channel pyroelectric NDIR detector, along ...
ByLiORA
C.F. Maier's covering systems are not only used in Germany, but also internationally, for example at the Petingen sewage treatment plant in Luxembourg. This extensive contract, awarded by Zahnen Technik GmbH, involved covering several basins, channels and shafts that had to be covered during ongoing ...
The global energy sector is undergoing a regulatory shift that makes high-precision methane quantification mandatory rather than voluntary. With EPA OOOOb and OOOOc finalized and EU methane regulations advancing, operators must rely on Optical Gas Imaging to meet compliance obligations and demonstrate verifiable emissions data.The Regulatory Shift: From NSPS OOOOa to the OOOOb/c EraFor nearly a ...
The battery recycling industry processes complex material streams including multi-chemistry cell formats, mixed metal alloys, and composite electrodes. Undetected metallic contamination remains one of the most costly and disruptive risks a facility can face. Metal detection systems are mission-critical infrastructure that determine product purity, downstream equipment integrity, and regulatory ...
C.F. Maier was commissioned to roof a screw pumping station at the Cologne-Stammheim sewage treatment plant. The order comprised four chambers, each 3.80 meters wide and around 10 meters ...
For small and medium-sized investors in Latin America, entering the construction materials market requires a careful balance between cost control and production efficiency. Choosing the right concrete batching plant is not only about minimizing upfront investment but also about building a sustainable profit model. With fluctuating material prices and diverse project conditions, understanding how ...
In industries where metal components are exposed to harsh environmental conditions, corrosion is a major concern. Moisture, salt, and pollutants can gradually degrade materials, reducing their strength and lifespan. To evaluate how materials perform under such conditions, manufacturers rely on salt spray testing in Gurugram as a reliable method for assessing corrosion resistance. Salt spray ...
Air quality software is moving the environmental tech landscape from hardware-centric monitoring to software-enabled intelligence. Sensor networks feed real-time dashboards and cloud-based analytics, enabling proactive management of air quality for industries, cities, and environmental professionals.Evolution from Sensors to Smart SoftwareTraditional monitoring relied on fixed stations and ...
The automotive industry is evolving rapidly, with a strong focus on sustainability, safety and regulatory compliance. As vehicles reach the end of their lifecycle, the materials used in their components can have a significant impact on the environment. To address this concern, ELV testing in Gurugram has become an essential process for manufacturers and suppliers involved in automotive ...
The energy sector faces escalating regulatory scrutiny and mounting operational complexity. Traditional LDAR relies on labor-intensive, periodic manual monitoring, creating gaps in fugitive methane management. This shift toward fixed Optical Gas Imaging (OGI) technology augmented by Artificial Intelligence (AI) enables autonomous, continuous vigilance, establishing an unblinking safety ...
Danger lurks in, around, and on top of storage silos. In a proactive approach to employee safety, a leading North American cement producer undertook a company-wide initiative to reduce risk. Their solution to keep people firmly grounded in a culture of safety? Automating silo level measurement using a variety of level sensors. The goal of the silo safety initiative was to eliminate the inherent ...
Level sensors play a leading role in the implementation of cloud technology for a range of industries, including grain storage and handling. BinMaster's product line includes four sensor types that provide cloud-based connectivity, accurate bulk material mapping, and precise measurements of bin and silo ...
Super cement producers care about people, products, and profit. 3D scanners, laser, and radar technologies ensure accurate monitoring of product levels. No manufacturer wants to risk a bad batch due to missing materials. That's where sensors come in. Cement manufacturers find non-contact level sensors attractive for several reasons: ...